Samsung s5230 network solution
here is the solution for s5230 no signal...
if u already write eeprom and after that no signal then try this
if u already write eeprom and after that no signal then try this
Samsung s5230 touchpad not working solution
if u already try to change touchpad glass then u have to remove these parts...ur prob,ll 100% solved..
Galaxy Notes N7000 Repair Imei OK
Quote:
Welcome to Octopus Box Samsung software version 1.2.8-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: GT-N7000
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM169
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-I5500
Detected phone model:
HW Version: XXXXXXXXXXXXXX
Phone model is not supported
Mode: Normal
Phone model:
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM169
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Phone IMEI: 004999-01-064000-0
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Phone IMEI: 004999-01-064000-0
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
Old IMEI: 004999-01-064000-0
New IMEI: 359616-04-863474-5
Writing new IMEI. Please wait...
New IMEI successfully writed.
Please, restart phone to apply changes
Link
Subscribe to:
Posts (Atom)
