All Volcano Box & Phone, updated Driver in one EXE Free Download

Download Samsung 300K TOOL [ TO FORCE ENTER DOWNLOAD MODE VIA USB ]

Micromax p300 hanging logo sloved (Flashing) Firmware & Tools Free Download

MICROMAX P300
HANGING LOGO SLOVED
(FLASHING)

Samsung Galaxy S4 LTE (GT-I9505) receives official Android 4.3 update

NOT : UFTER UPGRADE CHANGE LOGO
Download Firmware
Download Firmware

World First Quad Core CPU Samsung X-5292 SPRD 3 (6810 / 8810 CPU) fully USB Support

World First Quad Core CPU Samsung X-5292 SPRD 3 (6810 / 8810 CPU) fully USB Mode supported Only With Volcano Box
Read info

Update Samsung Infuse 4G with Jelly Bean 4.1.1 JRO03 Firmware

Read File


ONE UNIVERSE, ONE SUN, ONE MOON, ONE KINGDOM, ONE KING and OUR VOLCANO BOX

HowTo Flash a10 using LiveSuite ? NXG Xtab A10 Hard Reset DONE

1. Requirements:
(1) Windows PC
(2) USB Cable
(3) Upgrade tool (LiveSuit.exe)
(4) Firmware image file
(5) Windows USB drivers

2.Upgrade Steps:
(1) Unzip the upgrade tool and USB drive to your hard driver
    Double-click the LiveSuitPack10x_english.exe file, it will automatically install the driver files. Click "OK" to complete the driver installation.

(2) Open LiveSuit.exe
    Double-click to open the upgrade tool LiveSuit.exe

(3) Select the firmware
    Click the "SelectImg" button (the first button from the left) to select the firmware .img file.

(4) Turn off your tablet

(5) Press the key combination to start it in the upgrade mode
    a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
    b. Connect the USB cable to tablet and computer
    c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
    d. DON'T release the "Vol -" button till the LiveSuit window pops up
    e. You can now release the "Vol -" button
    (Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
    You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.

(6) Select the format to force upgrade
    Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !

(7) Upgrade begins
    Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.

(8) The upgrade is complete
    Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."

(9) Automatic restart
    After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
    Slow start-up for the first time, please be patient.
    If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.

(10) Congratulations! You have flashed the firmware.
NXG Xtab A10 with OG flash file&tool



Firmware link#
NXG_Xtab_A10_StockROM_ICS_4.0.3_
NXG_Xtab_A10_StockROM_ICS_4.0.3_1st_April_2012
Flash tool link#
A10_Lve Suit
A10_LiveSuitPack_version_1.09_20111101
Drivers link#
ABD Drivers
ADBDrivers
ReadMore>>>iOS 7.0.4 Release iPhone iOS Update !! Free Download

Karbon A51 Google Account & Pattern Unlock Done By Dragon Box 100% Working

Karbon A51 Pattern/Google Lock Removed Done

Boot Key_Press-Volume Up And Volume Down
How to Root and Install Custom Recovery in Motorola Xoom Wi-fi on ICS 4.0.3 Firmware

How to Root and Install Custom Recovery in Motorola Xoom Wi-fi on ICS 4.0.3 Firmware

By the application of rooting on the Motorola Xoom, you can enjoy several benefits of rooting on your device like enjoying the root only apps, overclocking of your system and browsing the system files without any permissions.

In this guide, we’ll tell you how you can root your Motorola Xoom Wi-Fi and install Custom Recovery on it. Warranty voids the warranty of your mobile phone or tablet, only way to get the warranty is by restoring the factory firmware.

Preparing for the Installation:

1. Backup all of your SMS Messages using SMS Backup Application.
2. Sync all of your Contacts with the Gmail Application.
3. Copy all of your notes manually to somewhere else, as these would be lost in the firmware upgrade.
4. Take a backup of call logs, APN Settings, and other important things.
5. Charge your mobile phone so that it would have around 50% battery.
6. This guide is applicable only for the firmware version 4.0.3 and wouldn’t work perfectly on others. You can proceed, but at your own risk.

Step 1: Download and Copy the Required Files to Your Xoom

• Download the superuser package from here and the ClockworkMod Recovery Image from here. Save both on your computer, and Rename the Clockworkmod image to “recovery.img“.
• Connect Xoom to your computer using the data cable.
• Copy the downloaded packages to the root of your Xoom’s SD Card.
• Disconnect the device from the computer.

Step 2: Installing ClockworkMod Recovery on Xoom

• Turn off your device, and reboot it in the “fastboot” mode.
• Connect the device to the computer.
• Open up command prompt on your computer, and type “fastboot flash recovery recovery.img” this will push the recovery file to the device.
• The device will reboot automatically, when the images is copied.
• Disconnect the device from the computer.

Step 3: Installing Superuser and Rooting the device

• Turn off the device, and reboot it in the recovery mode. You can do this easily by holding the “Volume Down” button when the device shows the Motorola logo while booting up.
• Select, “Choose zip from SD Card” option and then select the superuser package file from the SD Card.
• The package will be installed on your device.
• Reboot your device.

You’ve successfully Rooted your Motorola Xoom Wifi.

What others Searched for:

root xoom ics,xoom root ics,xoom 4 0 3 photo recovery,root xoom 4 0 3,xoom root 4 0 3,root motorola xoom wifi 4 0 3,xoom ics root,root xoom ics 4 0 3,how to root motorola xoom 4 0 3,how to root xoom 4 0 3,

iOS 7.0.4 Release iPhone iOS Update !! Free Download

Download Link
==========================================
7.0.4 (4 GSM): iPhone3,1_7.0.4_11B554a_Restore.ipsw
7.0.4 (4 8GB): iPhone3,2_7.0.4_11B554a_Restore.ipsw
7.0.4 (4 CDMA): iPhone3,3_7.0.4_11B554a_Restore.ipsw
7.0.4 (4S): iPhone4,1_7.0.4_11B554a_Restore.ipsw
7.0.4 (5 GSM): iPhone5,1_7.0.4_11B554a_Restore.ipsw
7.0.4 (5 GSM+CDMA): iPhone5,2_7.0.4_11B554a_Restore.ipsw
7.0.4 (5c GSM): iPhone5,3_7.0.4_11B554a_Restore.ipsw
7.0.4 (5c GSM+CDMA): iPhone5,4_7.0.4_11B554a_Restore.ipsw
7.0.4 (5s GSM): iPhone6,1_7.0.4_11B554a_Restore.ipsw
7.0.4 (5s GSM+CDMA): iPhone6,2_7.0.4_11B554a_Restore.ipsw

Procedure How to Update Sony Xperia Arc with xMOD Ice Bean 4.0.4 ROM Free Download

Here comes one more surprise to the Sony Xperia Arc handset as it gets the xMOD Ice Bean Android 4.0.4 firmware and in the due course of this article we will go through on how you can install the latest firmware version of Android 4.0.4. In few days we might see JellyBean 4.1 firmware by Jader13254 who has developed this xMOD Ice Bean ROM. Though this firmware is based on the Android 4.0 ICS but it includes many of the Jelly Bean features like keyboard, Google Now, Launcher and the Google Play Store.
Please make sure that you apply this firmware to Sony Xperia Arc smart phone that you have. Just before updating your smart phone and we going through the instructions, you need to back up your device and follow some instructions to be performed on your device.
You need to take the backup of the all the data present on your mobile in case if the data gets corrupted during the firmware upgrade, you can restore back the same.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Ensure that you have turn off the antivirus protections and ensure that you have minimum battery left on your device. You should also ensure that USB debugging is enabled on your device as well. Once you are ready with this pre upgrade instructions then only you can proceed to the firmware upgrade.
Update Sony Xperia Arc with xMOD Ice Bean 4.0.4 ROM
Before you proceed with the upgrade, the basic instruction first up is to ensure that Boot loader in your Xperia Arc handset is unlocked and the device is also rooted. Once you have done that follow the procedure mentioned below –

• You need to download xMod Ice Bean 4.0.4 Firmware Package on to your PC. Once downloaded you need to connect your device using the USB cable and then place the downloaded zip file on to your device.
• Disconnect the device and turn off off the source so that you can enter it in recovery mode.
• To enter Xperia Arc in recovery mode you need to press the volume down button and the power button simultaneously. Once done, the device gets through the Clock work mod recovery.
• In the recovery mode you need to select “install zip from sd card” > “choose zip from sd card” and then choose the xMOD firmware package which is placed on your device. Wait for 5 minutes until the update is applied.
• Now follow the on screen instructions to restart your phone.

Once your phone is restarted it means that custom ROM is applied to your device. Do let us know if you face any issues
Via

What others Searched for:

xperia arc s custom rom,precios xperia ice,xperia arc recovery mode,play store ICS 4 0 4,xperia arc s recovery mode,xperia arc s custom firmware,xperia arc custom rom,xmod recovery arc s,volume mode sony xperia arc s,xmod-ice-bean-4-0-4,

Update Samsung Infuse 4G with Jelly Bean 4.1.1 JRO03 Firmware

Google Nexus tablet brings the Android 4.1 Jelly Bean version to the world of droid and this is with version number as JRO03. Samsung Infuse 4G gets the love of the Android 4.1 Jelly Bean update although this is the custom firmware launched by the XDA forums developer called Supernewbdev who came in quickly with this update to the long forgotten Infuse 4G smart phone.
Please note that official firmware of this device hasn’t been announced and 4.1 Jelly bean brings the goodness of features like Voice recognition and user interface changes. But before we proceed with the upgrade procedure you should make sure that you go through the essential required steps before updating your smart phone here –

• Data present on your Infuse 4G smart phone will be lost during this update and we advised you to back up your files so that you don’t lose any important file. Take the help of following apps –
  

  SMS – Use “SMS Backup & Restore app”,Contacts – You need to Sync with the Gmail application,
  Call Log - Use Call Log and Restore app

• Please ensure that you have more than 40 % battery life on your smart phone or else there is possibility that your smart phone goes down with power in the middle of the firmware upgrade.
• Make sure that USB debugging is enabled on your smart phone. Follow the path Settings > Applications > Development > USB debugging” and you should tick the USB debugging option.
• You also need rooting access to your Infuse 4G smartphone.
• Please make sure that your phone is rooting on the current firmware that you have.
• Users should understand the risk involved in the custom firmwares.

Update Procedure
Follow the below instructions carefully to update your Infuse 4G smart phone with the latest JellyBean 4.1 JRO03 firmware package –

• Download the JellyBean 4.1 Firmware package to your PC and once downloaded connect your phone using the USB Cable to the PC and then move the downloaded content to the root of your SD card.
• Now disconnect the device and turn off your smart phone so that you can enter it in recovery mode. One can easily enter this device in recovery mode pressing the key combination of volume up, Volume down key and holding both you need to press the power button.You can make use of the following  recovery mode –
• Up next in the recovery mode menu you need to select “install zip from sd card” > “choose zip from sd card” and t hen choose the downloaded package to apply the updates.
• It will take not more than 10 minutes for the updates to be applied.

Do let us know how this update has went to your Infuse 4G smart phone. Did you go through any problem.

What others Searched for:

JRO03,samsung infuse jelly bean rom,upgrade infuse 4g to jelly bean,samsung infuse root jelly bean,infuse 4g jelly bean,aokp jelly bean 4 1 1 for defy,how to update infuse to jellybeans,firmware galaxy infuse,supernewbdev,samsung infuse jelly bean root,

Samsung Galaxy Ace S5830 Droid ACE Cyanogen Mod 7.2 Custom ROM Update Free Download

The latest release version of Cyanogen Mod 7.2 is optimized for the best performance and the best user interface. The love of latest Cyanogen Mod 7.2 is brought to the Samsung Galaxy Ace smart phone. Samsung Galaxy Ace surely will not receive the Android 4.0 update officially but there is large number of custom firmware available for this handset model.
All thanks to the developer of the XDA forums masterex567 who has built this ROM. In this article we will be seeing procedure on how to apply this Cyanogen Mod 7.2 firmware on to your Ace smart phone.
This firmware comes with following features added –

• Added Fire kernel OC
• Added Adrenaline Boost
• Faster GPS Lock
• Added BRAVIA Engine
• A lot of  free ROM
• Over 80 MB of Free Internal memory

Essential Pre Requisites
You need to make sure that your device is with the following essential required pre upgrade steps –

• If you need this firmware on your device, then you need to first update your Samsung Galaxy Ace to DDKQ8 and then root the same. Rooting is quite essential to upgrade your device to this ROM.
• You need to take the back up of your data with the help of procedure that you follow earlier.
• Also users need to enable the USB debugging by going through “Settings > Applications > Development > USB debugging ensuring the option is ticked.
• You should charge your battery to the minimum of 60 % so that you don’t run of battery life during the process of firmware update or else you need to visit Samsung Care to repair your device from this problem.

Ensuring that you have followed these steps we will see the procedure to update your device.
Procedure to Update
The updating procedure is pretty much simple. Follow the steps below –

• You need to download the Samsung Galaxy Ace S 5830 custom firmware package on to your PC. Once these are downloaded you need to connect your device to the PC and then place the zip file on to the root of your phone memory card.
• Once those files are copied you need to disconnect your phone and turn off the main device so that you can enter it in recovery mode.
• Once can easily enter Samsung Galaxy Ace S 5830 in recovery mode pressing the Menu button, Power button and the volume down button.
• In the recovery mode you need to select the option of “install zip from sd card” > “choose zip from sd card” and then choose the downloaded package as moved to the phone’s internal memory. In the recovery mode use volume rocker keys to move up and down the selection and power key to select a highlighted option.
• Once when the files are selected it will take maximum of 10 minutes to apply the updates. Once those are applied, you will be taken back to the recovery mode screen. Now among the options you need to select ‘reboot system now’ so as you can boot your device with the new firmware that you have applied.

Do let us know how you feel about the Cyanogen Mod 7.2 Custom ROM on your smart phone via comments section below.
Via
What others Searched for:Droid ACE,fire kernel galaxy ace,cyanogenmod 7 2 overlock s5830,smartphone galaxy ace s5830,droidace,CM7 2-dRoidACE-BlackhawkOC,galaxy ace cfw,galaxy ace 7 2 rom,galaxy-ace-s5830-droid-ace-cyanogen-mod-72,best galaxy ace rom,

Update Samsung Galaxy Captivate i897 to JellyBean 4.1.1 Based Slim Custom Firmware Free Download

Samsung Galaxy Captivate is one of the old device and various firmware are available for this device. As the JellyBean is launched many of the users are doubtful where it will work on their device or not. Officially there will not be any update to Jelly Bean not even Android 4.0 Ice Cream Sandwich OS to Samsung Galaxy Captivate i897 device. Thanks to various developers who are constantly working out to bring the best built firmware on various devices. One such was teased for Samsung Galaxy Captivate and here in this article we provide you the guide to update your device with the JellyBean 4.1.1 Based Slim Custom Firmware.
Among the features included in this ROM are –

• Custom Home Launcher
• Fully built from AOSP sources
• Includes JB launcher
• Comes with newly added Google Now
• Face Unlock feature is introduced
• 5 languages support
• Easy to customize features

Pre Upgrade Follow Up Requirements
Essentially before preceding the firmware upgrade, you should go with the following pre upgrade instructions required on your device.

• Make sure your device is Samsung Galaxy Captivate i897 and no other variant of Galaxy phone.
• Make sure you have charged your phone to up to 40 % although full 100 % charging is good and highly recommended.
• Users should enable USB debugging option by going through the path “Settings > Applications > Development > USB debugging”. Make sure it’s ticked.
• Since this is a custom firmware, this requires root access to your smart phone and this is why rooting is required. So root your device on the existing firmware.
• During the process of the firmware update the data present on your smart phone might be lost. So its advised that you take the back up of everything present on your smart phone by using the following help guide -

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Ensuring that everything you have followed is positive way we will proceed to see the firmware update procedure
Galaxy Captivate Update Procedure to JellyBean 4.1 Slim ROM
Follow the instructions below to apply the updates pretty easily on your Captivate device -

• First you need to download the latest JellyBean 4.1.1 firmware update package and then connect your device to the PC using the USB cable. Now move the downloaded file to the root of your SD card or the internal memory.
• Now disconnect your device and turn off your phone to off state so that you can enter it recovery mode.
• One can easily enter Samsung Galaxy Captivate in recovery mode by pressing the volume up key, OK button and the power button.
• Once you are in the recovery mode, you need to select the option of “Wipe data/factory reset”, “Wipe Cache partition” to clear all the cache present.
• Select “install zip from sd card” > “choose zip from sd card” after which it will take around 10 minutes to apply these updates.

So how this update went through your phone? Do let us know if you have faced any issues during this update.
What others Searched for:update samsung captivate to jellybean,samsung captivate jellybean,jellybean captivate,download jellybean 4 1 1 for galaxy s captivate,samsung captivate root jelly bean,samsung 1,download jelly bean to samsung i897,how to upgrade captivate to 4 1 1,Captivate with Jelly Bean 4 1 Firmware,i897 samsung captivate,

Samsung Galaxy S Plus to Official Value Pack XXKQI Gingerbread 2.3.6 ROM Free Download

Samsung Galaxy S has been a super hit model and there are so many firmware custom and official ones available for this device. Its upgrade version as the Galaxy S Plus GT I9001 didn’t grab much attention. But today we got the hang of the official value pack XXKQI version based Gingerbread 2.3.6 firmware.
Galaxy S Plus GT I9001 will not receive the Android 4.1 Jelly Bean update and its official but by custom firmware you will surely get this update if available.
Here in this guide we through the process on how you can update your S Plus with the XXKQI firmware based official Gingerbread update.
Pre Upgrade Instructions
Please make sure that you go through this pre upgrade instructions –

• Please make sure that your phone is Samsung Galaxy S Plus GT I9001 and not any other model.
• Also you should ensure that your phone is charged up to 50 % of the overall battery life. This is to ensure that your phone doesn’t turn off during the process of the firmware update.
• Please make sure that you have enabled the USB debugging on your smart phone. To do that you need to head to Settings > Applications > Development and then select USB debugging”.
• Make sure that you have selected the Samsung KIES mode in Galaxy S Plus. You can do it by going through “Settings > Wireless & Network > USB Settings > Samsung KIES”.
• You should take the back up of existing application on your mobile phone and you can make use of –

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Also users should understand that this is an official release by Samsung, so don’t worry of anything.
Procedure to Update
Make sure that you follow the below procedure correctly –

• First of all you should download the Gingerbread XXKQI 2.3.6 Firmware and the Odin v4.43 on to your PC or laptop. Once downloaded you need to extract the same on to your computer.
• Open the Odin v4.43 and install it on your computer. Once installed keep the tool open.
• Connect your phone using the USB cable to the PC and then transfer the downloaded files to the root of your SD card. Not turn off the phone after disconnecting the USB cable.
• One can easily enter Samsung Galaxy S Plus in download mode by pressing the volume down key, center button and holding them but you need to press the power button.
• UP next is to connect your phone using the USB cable to the PC. As soon as you connect, the ID:COM port turns yellow which means drivers are successfully installed on your computer to successfully.
• Now click on the OPS tab and select the “AriesVE.ops”, click on the “PDA” tab and then select the “I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5”. Once that is done you need to hit the option of “Star”.
• It will take maximum of 5 minutes for the updates to be applied.
• Once the updates are downloaded and applied your phone will be restarted and you will be started with language selection on your phone.
• Turn off your phone so that you can enter it in recovery mode. One can easily enter in recovery mode by pressing the volume down key, center button and holding them but you need to press the power button.
• In the recovery mode “Wipe data/factory reset” and also select Wipe Cache partition and then reboot your device by selecting reboot system now. This option is to clear all the cache data present on your device and to ensure that you don’t get any more of those force close errors.

Now to check for the version on your mobile phone you  need to visit the Settings > About Phone and then see the Android version, baseband version. Do let us know if you face any issues.

What others Searched for:

i9001xxkqi_i9001xxkpm_i9001oxfkq3_home tar md5,samsung s plus,SamsungGalaxySPlustoOfficialValuePackXXKQIGingerbread2 3 6ROM,i9001xxkqi,update samsung galaxy s plus gt-i9001 to android 2 3 6,root galaxy s 4g 2 3 6,samsung official volume pack 9001 i,rom 4 1 1 galaxy s i9001,samsung galaxy gt i9001,Celular Samsung Galaxy S GT i9001 Plus,

Micromax x325 Read Flash File Free Download

Scaning MTK Pinouts,Connect the phone and Power On it
..#.....
Rx:2 Tx: 4
CPU: MTK Model:625A
Pinout Setting Ok.
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT625A Ver: CA01 SW:0001
Loading Bootloader 7
Nor Flash Code: 00C20025(00370000)
Nor Flash Size: 0x800000 Hex Bytes
Verifying Baud...
Set Baud:921600 OK.
Reading(Nor)...
The phone information:
LCSH50_BU1_6464_11B_PCB01_GPRS_MT6250_S00.LFAEB01_ 11_32_1_2T12M0116_M531.BIN
the file not be encrypted
Read OK.
Total time: 1 mins 36 s
File Save to: D:\china flash file\micromax x325\micromax x325 LCSH50_BU1_6464_11B_PCB01_GPRS_MT6250_S00.LFAEB01_ 11_32_1_2T12M0116_M531
Pinout Setting Ok.
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT625A Ver: CA01 SW:0001
Read Information From the Phone...
Infr: MT6250_LFAEB01.11.32.1.2T12M0116_M531__Melody_V0.0
Reading(Backuping) NV data...
NV Data saved to: D:\china flash file\micromax x325\NV_MT6250_LFAEB01.11.32.1.2T12M0116_M531__Mel ody_V0.0
Backup Done.(75)
micromax x325 - Download - 4shared