Followers

SPD+Qualcomm Android Reset Tools New Free Download


Guide::- 1] Connect set in fastboot mode
2] Enter 1 to HARD RESET
3] Enter 2 to REBOOT set

Spice M-5372 successfully reading phone unlocking code FLash File

Hi all  members and dragon user here is success screen shoot of reading unlocking code of spice M-5372 .if useful say thanks
also uploading spice M-5372 flash file with mediafire link here is link
m6275 spice(3)

Samsung C3303 Charging and Usb Ways Jumper Solution

c3303 charging problem
c3303 charging solution
c3303charging ways
c3303 charging jumper

How To Identify HTC CID (Read From HTC Android) With Volcano Android tools

How To Identify HTC CID (Read From HTC Android) With Volcano Android tools :
ow To Read HTC Android CID :

  • Open Volcano Software
  • Go To Android Tab
  • Click To FASTBOOT
  • Mark HTC Phone
  • Select CIDInfo
  • Click To Start
HTC CID READ Done


Note - Must Be Connect On Fast Boot Mode



MID Info To FastBoot Mode :

Identify Info To Fast Boot Mode :

Easy-JTAG 1.0.90.0 Daily Update - ONE click EFS REPAIR, First in the world

Easy-JTAG 1.0.90.0 Daily Update - ONE click EFS REPAIR, First in the world
We glad present you new function called "ONE CLICK EFS REPAIR"
Now you no need play with adress, size, etc.
Just download files for example i9100 file named. I9100_EFS_v1.0.rcp
and write to phone via JTAG connection in 1click.
Dont forget you can repair EFS only (null null imei) and this method work only on 100% working phone hardware.

Added :
- support GT-i9100 (One click EFS repair ) - first in the world via JTAG

- support GT-S8500 (One click EFS repair ) - first in the world via JTAG
- support GT-S8600 (One click EFS repair ) - first in the world via JTAG

Via JTAG connection:
- support SAMSUNG GT-S6310N (Read/Write,OneClickRepair)
- support NOKIA LUMIA 620 (Read/Write,OneClickRepair)
Via direct emmc connection:
- support SAMSUNG GT-P3113 (read/write via emmc direct) - first in the word

p.s - files will be visible on support in few hours. New updates on the way. EMMC-tool pro in final testing stage

Android Tool 1.4 Pattern/Unlock IMEI/Repair OC Root APK

Android Tool 1.4 Pattern/Unlock IMEI/Repair OC Root APK
1. Root for all devices
2. MTK IMEI repair
3. Contact backup/restore
4. Wipe Device Format
5. Remove Pattern/Gmail/Pin/Password
6. Change Boot Animation
7. Read device Info
8. System Partitions view
9. APK Install Batch (SD Support)
10. Integrated Application of Ultimate-Samsung Pattern unlock by my good friend Dawood
11. Fix compatibility Porblems when installing APKs
12. App2SD changes the installation path to sdcard
13. Install Arabic Language (using morelocal and arabic keyboard)
Application Requires Internet Connection and Registration by email and Phone number








DOWNLOAD HERE

Root Huawei Ascend Y300 rooting without bootloader unlock code

The bootloader stays locked, you can't install any custom recovery or ROM after rooting this way. To install a custom recovery or ROM you have to unlock the bootloader.

So I've found this thread in an Italian forum, which describes a rooting method that doesn't require a bootloader unlock code from Huawei!

This pack containes an Italian guide and everything you need for the procedure.
If you don't speak Italian, then follow my instructions.

0. Make sure fast boot is turned off on your phone
1. Extract the downloaded .rar file to anywhere you want.
2. Copy the "dload" folder to the root of you SD card.
3. Turn off your phone, then turn it on while holding down (Volume UP) + (Volume DOWN).
If the firmware update is finished you will get a green tick. The phone will reboot, be patient.
If you get a pink screen, then put the "dload" folder into the Internal memory's root to solve the problem.
4. Install unlockroot3.exe, then open it after the installation is finished. (Get a newer version of Unlock Root from unlockroot.com)
5. Enable USB Debugging on your phone at Settings --> Developer settings, then plug the phone to your PC.
6. The PC will recognize a CD drive. Install Handset WinDriver.exe from /drivers/adb_driver/.
7. Click the big, green "ROOT" button. When it asks, decide if you want "Power saver" to be installed to your device or not.
8. After the process is finished, it will ask if you want to reboot. Click Yes.
9. After reboot you should see Superuser installed to your phone.
10. If you get errors (camera, flash not working) or the screen looks like it's been washed out with bleach,
Then run install-windows.bat from the folder named "Y300-boot-B176". This should solve the errors.

This method is tested with the following firmware versions:
B164, B166, B169, B171, B172, B173, B174, B175, B176,
B178, B181, B184, B188, B192, B195, B196, B197, B199

How to root Samsung Galaxy Note 2 Free Tutorial

I know there are lot of guides on how to root the Galaxy Note 2,but unfortunately I have not seen a guide that is clear enough to beginners that know nothing about Android. So, after hard work I have done a guide on how to root the Samsung Galaxy note 2 and put it in your hands.
Note:I Have Also Made A Picture Full Guide So, IF This Guide Wasn't Clear For You, You Can Go HERE Introduction:
Today, I will guide you on how you can root your Samsung Galaxy Note 2.These methods are the most easiest, safest and the fastest methods up to date. To start off, the first method became easy all because of the hard work of this man mskip, all credits go to him. The second method will take little more time but it’s more guaranteed to work on any Galaxy Note 2.
Disclaimer:
I’m not responsible if something went wrong on your phone(Usually nothing goes wrong), you’re doing this on your own responsibility.
Rooting will void your warranty so, don't root unless you know what you are doing.

Method1:Rooting via Galaxy Note 2 Toolkit:
Requirements:
1-Download the Toolkit from HERE
2-Make sure you enable USB Debugging
Go to Setting-> Developer options-> Tick “USB debugging”
3-Make sure to backup your EFS file before proceeding.

Let’s Start:
Step1: Install the toolkit on your computer.
Step2: After the toolkit start follow instructions:
Now in your phone go to Setting-> About phone then scroll down and check what is your build number, if you didn’t see your build number then just type 01 and hit enter to continue.

Now in this screen before we start rooting the Galaxy Note 2 we should first install the drivers so choose the option 1

Now in this screen after you installed the drivers you will get back to the main screen. Now choose 2 and continue.

Now in this screen we should choose the way you want to root your phone IF you selected your build number as in your phone in the main menu then choose option 2 to root and install Busybox only or choose option 3 to root ,install Busybox and install Custom Recovery. But IF you didn’t see your build number as in your phone and typed 01(as I told you to do so) then you have to type 5

If you have chosen option 2:
Now you will have to choose the superuser apptto use I recommend option "2" (SuperSu)Since it works better with icecream Sandwich and JellyBean. The toolkit will guide you now through the rest of the process.
If you have chosen option 3:
It will ask you which custom recovery do you want.IF you didn’t know which one to choose then type 2 and continue. Now you will have to choose the superuser app you want to use I recommend option "2" (SuperSu)Since it works better with icecream Sandwich and JellyBean.Now the toolkit will guide you now through the rest of the rooting process.
If you have chosen option 5:
This option will root your phone by installing a custom recovery then installing the root files from there. So, if you only wanted to root then make sure you flash(install) back the stock recovery.
Now it will ask you if you have a custom recovery which I don’t think you have if your Galaxy Note 2 is new. So, type “no” and continue. It will ask you which custom recovery do you want. IF you didn’t know which one to choose then type 2 continue. Now you will have to choose the superuser app you want to use I recommend option "2" (SuperSu) Since it works better with icecream Sandwich and JellyBean. Now the toolkit will guide you now through the rest of the rooting process.

To flash back the stock recovery:
Open the toolkit again. And follow the instructions above until you get till this screen. Click image for larger version

Name: M1 rooting pic14.jpg
Views: 13612
Size: 117.4 KB
ID: 1720557 After you have chosen option 6 it will ask you “Are you ready you to continue?”, after you enable USB debugging in Setting-> Developer options, type yes and hit enter to continue. Now the toolkit will guide you now through the rest of the flashing process which will include using odin. OR
Method2: Rooting using Odin: [Recommended] This method is better since it works for almost all Galaxy Note 2s,and it will only root and install busybox.
All credits go for Chainfire for making the CF-autoroot make a look at the Original Thread
Requirements:

1-Download these files:
1-CF-Autoroot Depending on your model number which could be found in Setting-> About Phone:
A) For N7100 Model go HERE.
B) For N7105 Model go HERE.
C) SHV-E250K Model go HERE.
D) SHV-E250L Model go HERE.
E) SHV-E250S Model go HERE.
F) SPH-L900 Model go HERE
G) SGH-I317 Model go HERE
H) SGH-I317M Model go HERE
I) SGH-T889 (T-Mobile version) Model go HERE

IF you didn't see your model number above don't try this method because it might brick your phone.
2-Odin 3.07 From HERE.
3-Samsung USB Drivers from HERE and then install them.
4-Make sure to backup your EFS file before proceeding.

Step1:Extract the CF-Autoroot until you got a file with .tar.md5
Step2: Extract odin307.zip then run Odin3 v3.07 as administrator.
Step3:Shutdown your Note 2 completely. Then, hold down the volume down button+ the home button then press the power button for 5 seconds, after you will see a warning screen just press volume up.
Step4: Now click on “PDA” and choose the .tar.md5 file we downloaded earlier. Then connect the USB cable to your computer then to your Galaxy Note 2. Now Click on “Start”.
Step5: Once it successfully finishes you will see “Pass” in the above table of the “ID:COM