Followers

Nokia 5130c mmc memory card problem solution ways track jumpers 100% Tested

 Nokia 5130 with Memory Card Jumpers, Memory card Problems, Memory Card Ways, MMC Problem, MMC Solution,Nokia 5130 mmc memory card problem can be solved with this simple diagram check this red link with meter and if broken make it with any insulation wire.acctually this is a voltage link and if broken then memory card will not work proper. Some more links will be posted soon.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information

Nokia 1280 Light without Ic Display Keypad Led 100% tested

 Nokia 1280 with Blank Display, Blinking Display, Display Light Jumpers, Display Light Problem, Display Light Solution, Display Light Ways, Keypad Light, LCD Display Light, Nokia, White Display
Nokia 1280 Display Keypad Led Light without Ic 100% tested.some times due to water damage or rust we may lost parts in nokia 1280 about light function. so in this case we were not able to solve nokia 1280 light problem display and keypad led light could not be ok and solve.


but now with upper diagram we can easily solve led light problem in nokia 1280.look at diagram and you can see how much it is easy to solve light problem with this diagram solution.
you have to remove only coil light ic and three leg transistor so when you have removed these parts you can make jumpers as shown in diagram and 100% light solution tested be happy and do not forget to like us.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone

How To ANOTHER GUIDE FOR UNLOCKING Samsung S3 and Samsung S4

I HAD TESTED THIS ON 4.1.2

BRO FIRST OF ALL ROOT YOUR FONE WITH BELOW GUIDE
- Download and extract Odin http://www.shabbypenguin.com/OUDstuf...din3-v3.04.zip
- Download and extract (just once) CF-Root Download CF-Root Download
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press volume up to continue, do so.
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Congrats you are rooted


now your fone is rooted now do below steps

DIAL ANY CODE WHICH WORKS FOR U
*#0808#
*#7284#
*#9090#

IN UART SELECT MODEM
AND IN QUALCOMM SETTINGS SELECT DM+MODEM+ADB

NOW OPEN Z3X SAMSUMG TOOL V16.1 OR LATOR
SELECT MODEL I747 NOTE FIRST TRY BY CLICKING UNLOCK ID UNLOCK DONE THEN FINE BUT IF IT SAYS FOLLOWING ERORR THEN DO THE BELOW WRITEN STEPS

Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.443072
Reading security... error access denied
Done with Samsung Tool v.16.1

Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.443072
Reading security... error access denied
Done with Samsung Tool v.16.1
Done with Samsung Tool v.16.1
CLICK ON REPAIR
Press imei repair, choise repar EFS/Baseband, fill imei and choise imei (THIS OPERATION WILL WORK IN ADB MODE SO USB DEBUGGING SHOULD BE ON )
THEN FONE WILL REBOOT AND THEN REMOVE USB AND INSERT RJ45 (C3303k) CABLE
IT WILL DETECT FONE AND SAY REPAIR DONE

NOW YOUR Phone  IS TOTALY UNLOCK
LOG OF UNLOCKING DONE BY ME
Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SAMSUNG-SGH-I747
Android version: 4.1.2
Product code: Not Active
Phone version: I747UCDMG2
PDA version: I747UCDMG2
CSC version: I747ATTDMG2
IMEI: 0
Phone S/N: R21C75JA1LK
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Checking phone at COM11 OK
Repairing IMEI... OK
Reseting... OK
Repair done
Done with Samsung Tool v.16.1

How To Samsung Galaxy Pop S5570 Pattern Locked Easily Removed

Samsung Galaxy Pop S5570 Pattern Locked Easily Removed by piranha box

FLY F40 Android SPD World 1st Done Restart BY Volcano

BOOT KEY IS Volume + or - Key

LGTOOL 2.25 released more new for LG & HTC!

LGTOOL
by SEtool team

Version 2.25 released!
DIRECT DOWNLOAD LGTOOL & SGTOOL DOWNLOAD LGTOOL & SGTOOL FROM GOOGLE
New for LGTOOL direct services:Android Firmware Downloader [ADM] Version 2.0

LG L86C

- Read/Write MEID
- Read/Write Mcc/Mnc
- Read/Write MIN1 MIN2
- Repair Phone number(MDN)
- Read/Write SID/NID
- Read/Write BlueTooth address
- Read SSD_A, SSD_B
- Read/Write PRL
- Read/WriteSPC SPC
- Read/Write AKEY
- Read/Write OTKSL

LG E405, E405F

- Direct Unlock
- Repair IMEI 1
- Repair IMEI 2
- Repair Bluetooth
New for LGTOOL remote services:

LG Over 200 models

- improved unlock codes algo

HTC Over 20 models

- improved unlock codes algo

You can view our official reseller list here. Resellers with credits available are marked as “In stock”, please contact them now to avoid disappointment.
Note:
Since v. 2.0 new license system for activated users is added. Please do not install LGtool 2.xx until you purchase LGtool license (paid activation).
New users should install v.1.99 first to register smart card.

Android Firmware Downloader [ADM] Version 2.0

Download Android Firmware without Searching Webs with Android Download Manager [ADM] Version-2.0
its All Karbon,Micromax ,samsung,Bell,Lava,Lemon Etc Supported Free Download & Enjoy

How To Samsung S3 I9300&GALAXY NOTE 2(N7100)Boot Reapir

Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)
1)First Create Boot Card
2)Download teraterm-4.78
teraterm-4.78 3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)
 
Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper.
Select Spt Serial Port (look the picture)  

After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button
Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes
Info :
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_
After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture


open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.
any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMM
C

THIS SOLUTION FROM SAMSUNG OFFICIAL TEAM 

IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)

1)DOWNLOAD THIS FILE 2)EXTRACT ON DESKTOP 3)TAKE ONE MICRO SD CARD ALSO ONE CARD READER(SD MUST 2GB OR ABOVE) 4)INSERT THE CARD READER HOLDER THEN CONNECT USB PORT 5)OPEN THE Diskdump2.exe 6)SELECT GENERIC STORAGE DEVICE 7)AFTER THE SELECTION NEW WINDOWN APPER 8)USE WRITE BY SCRIPTS OPTION(4th Option) 9)WAIT FOR THE FINISHING DONE YOU SUCESSFULY MAKE A SAMSUNG BOOT CARD
DOWNLOAD

How To JellyBean 4.2.4 Q88 AutoTouch, AutoCamera, AutoGsensor File Download

Auto Touch
Auto Camera
G-Sensor Auto
download from here :http://www.mediafire.com/download/aj...AutoDriver.rar

Nokia Firmware Downloader New 100%_free_download_via_product_code

Nokia_firmware_100%_free_download_via_product_code

(1) first_install_Nokia_Care_Suite_PST_5.0_2013.13.4.4

(2) open_navifirm_plus
Our Previous : Nokia Firm (Nokia Firmware Downloader) Working
 Nokia Firmware (Nokia Firmware Downloader) Working 100%






http://www.4shared.com/zip/ttjihM6J/...Gsm_zone_.html

http://dl.vmall.com/c0t2yjg3s5_Nokia_Care_Suite