LG T500 Successfully Flashing Done With GSMULTI V3.0
(Thanks Mr Nasirahmed)
Here Gide About Flashing .
Infineon flashing on USB
1. Install GSMULti V30
2. Connect phone to usb cable without battery, Windows will ask for driver, show driver from C:\GSMULTI\UsbDrivers\INFINEON.
3.
Open USBMap from C:\GSMULTI, select INFINEON and click MAPPING START,
reconnect the phone to usb cable without battery. Some info will show
on PORT/KEYNAME, now SAVE & EXIT.
Here Image About Step 3
4.
Open GSMulti main software, go to Setting(s) > Configuration,
select DLL and firmware on S/W box, select USB as communication then
click OK. Now click START on main window, when the software says Wait
Phone Connecting.. reconnect the cable. If flashing not start without
battery just put the battery and slightly press power button.
Some new phones are from Infineon AGold plafrom, you need to install USB PortMapping Setup_1.7. Run USBMap_V07 from C:\GSMULTI, select INFINEON AGold Series and do mapping, rest of the procedure is same.
Here Flasher (GSMULTI V3.0)
gsmulti v3.0.rar - 4shared.com - online file sharing and storage - download