Flashing Firmware Image Files Using The Rockchip Batch Tool

This is a quick guide to Flash single firmware image files onto your tablet. Manufacturers mainly provide single image files to upgrade tablets, as do some Rom Cookers for their custom firmwares. If you want to install a custom firmware or want to return your tablet back to a manufacturers stock rom, for warranty purposes etc this is sometimes the only way to do it. It is quite straightforward to do so here we go! Firstly this is presuming that you have already installed the Rockchip drivers for your tablet if not follow my guide here: http://www.freaktab.com/showthread.p…-for-flashing! STEP 1

Make sure your tablet is charged. Download the Rockchip batch tool
Rockchip Batch Tool Download
STEP2
Unzip the file and start the RKBatchTool program, and use the firmware path selector to find your firmware image. Now put your tablet into recovery mode or flash mode as it is sometimes called and connect it to your PC. As you will see you will see that your device is connected, indicated by the green box. If you are upgrading from say a manufacturers Rom to a new version that hit the upgrade button, if you are installing a custom firmware that usually it is the restore button.
Step 3
Once you have done this the software will send the firmware to your tablet and the flashing process will begin, you will see firmware loading on the RockchipBatchTool screen, just leave it to do its work and be patient and be careful not to knock or touch anything while it is flashing. Once the process has completed your tablet will disconnect from the program and the green box will not be highlighted. Now the tablet will begin to flash and reboot with your new firmware on it!

HOW TO USE THE LIVESUIT PACK TO REPAIR OR UPDATE THE ROM YOUR ANDROID TABLET

HOW TO USE THE LIVESUIT PACK TO REPAIR OR UPDATE THE ROM YOUR ANDROID TABLET

[Note: The following instructions are generic. It may not apply to certain tablets that have their own methods of software update] 8) The first thing to do is to have installed the driver or controller of our tablet. Otherwise we can install reading another of our tutorials. 9) Then we locate the application LiveSuit.exe in the folder, and double-click it.


10) The program will begin with a warning message indicating that the update can be risky and you make a backup of your data before proceeding, and asks if we want to access a guided update. To continue the tutorial we will say we will no

11) Below is LiveSuit main screen with several buttons. In order to perform the flash need in our computer have downloaded an img file with Android ROM that works in our model of tablet (if you downloaded a compressed file, like zip or rar, need to extract the img file that comes in). So click on the button “Select Img” and after that choose the ROM you want to install




13) At this point we make the most important action: connect our tablet (that should be off) to computer via USB cable, and while doing this action must reset the tablet. Some tablets have a reset button that we press while making the USB connection, others do not have but can be reset by pressing a combination of buttons (eg: Vol+ and On). We will show both methods using the example tablet Woo Comet A10:

Method 1: Reset with the Vol+ and Power buttons

In this method we reset the tablet holding down a button while you connect the tablet to the PC with USB cable and press the power button repeatedly. That button keep pressed is normally the button “Volume +” (as in the tablet Woo Comet) but for tablets that do not bring volume buttons is used to reset the “Esc” or “Menu” (as Prolink tablet with MD-0696B). So before starting the procedure must be identified on the tablet buttons that we will use and the usb port by which we will connect it to the pc.



The tablet should be off. What we do right now is to press the Volume+ button (or Esc, or Menu, as appropriate), and while holding connect the tablet to the USB port of our computer and press repeatedly the power button until the program LiveSuit indicate on the computer screen the message in step 14 of this tutorial (usually takes 15 to 20 beats the power button, but can be less or maybe more, the reason is that if you press a certain pause will require less pulsations that if done quickly).

Method 2: Reset by pressing the Reset button

If our tablet has a “Reset” button and the previous method worked out or we find it difficult, then we can keep this one. But we need a needle or something similar with which we can push the reset button on the tablet. It should be noted that not all tablets come with the button, but if they bring is usually hidden in a small hole in the casing of the equipment (sometimes in one side, and sometimes on the back). In our example the Woo Comet has on the right side a small hole in which is hidden the reset button of our gadget:

At this point carefully insert the needle into the small hole until you hear a click that indicates that the reset button is pressed. Then, while pressing the reset button connect the tablet to the USB port of our computer, and we will show the message on to step 14 of this tutorial.

14) If the reset was successful a message appears asking if you want the PC to format the internal memory of the tablet (if not to do the procedure again). We will say yes because otherwise we will not flashing:
15) For security asks us if we are sure that we want to force formatting. We say yes:

1

6) Now the program starts the flashing process (or Android ROM installation) indicating the approximate time of the process:

  

17) Then get a message indicating that the update has completed successfully. You have to press OK to close the message.

  

18) Finally press the Exit button to quit the program and disconnect the tablet that already has the Android operating system ROM.

  

That’s it. It’s a simple procedure, all I can seem complicated is resetting the tablet when connected to the PC, but with a little dedication realize is achieved smoothly. See you later. PS: If you want to flash ROMs to your tablet you can visit our section dedicated to Android versions for download by clicking here and you can download the LiveSuit easily by clicking on this link.

[Manual ] How to install, repair or upgrade Android on your tablet using LiveSuit

1. Requirements:
(1) Windows PC
(2) USB Cable
(3) Upgrade tool (LiveSuit.exe)
(4) Firmware image file
(5) Windows USB drivers

2.Upgrade Steps:
(1) Unzip the upgrade tool and USB drive to your hard driver
Double-click the LiveSuitPack10x_english.exe file, it will automatically install the driver files. Click "OK" to complete the driver installation.

(2) Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe

(3) Select the firmware
Click the "SelectImg" button (the first button from the left) to select the firmware .img file.

(4) Turn off your tablet

(5) Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.

(6) Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !

(7) Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.

(8) The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."

(9) Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.

(10) Congratulations! You have flashed the firmware.

Lava Iris 356 Hard Reset Done

Here I will show you how to hard reset your Lava Iris 356. So that you can remove your pattern lock or gmail lock.
just follow my instructions:
1. Press and hold volume up & power key until you see this screen.

2. Now press Power Key, then you will see the below screen.

3. Now go to ” Wipe data/factory reset” by pressing volume down key.
4. Now press volume up key.

5. Now go to “Yes — delete all user data” by pressing volume down key & press volume up key.
6. Now press volume up key once again on “reboot system now”
Its all done friends enjoy

How To Flash With PhoenixSuit Guide

How To Flash With PhoenixSuit

PhoenixSuit Friend Of LiveSuit.exe

Open Your PhoenixSuit Latest Version

Click To Firmware Tab & Select Your .IMG File
Now Connect Tablet To Boot Mode , After Its Auto Started 


Now Click To Yes If You Want Full Update , No For Normal Update

Same Again Click To Yes If You Want Full Update , No For Normal Update

Tablet On Update 


Update Done : Enjoy

IDOO MODEL ID 720 Tablet Update Done Firmware Free Download

IDOO MODEL ID 720 Tablet Update Done
PCB TEXT
t730td (qd) 8653 v6.2

2 Camera

HOW TO CONNECT
PRESS AND HOLD VOL DOWN CONNECT CABLE GIVE DRIVER AND POWER PRESS 7 TIME













ROM LINK
t730-mainboard-v6.1 a13 gtide-t730-v1.0 gls1680-rtl8188ctv-kyt-053-v2.0-7660 wifi+bt+sim+2g+2cam bigm - Download

Ainol NOVO 10 Captain, NOVO 10 Hero II, and NOVO 7 Venus Firmware Upgrade – Step by Step Guide

 mportant: Make sure your tablet is charged to at least 50% charge, this is a precautionary measure because if the battery runs out during the upgrade or the upgrade is interrupted in some way it’s not going to be pretty.
Important: This process will wipe all user data and apps installed on the device, it is recommended to backup all your important apps and info before proceeding with the update.
Important: You need to download the correct version for your device, either version 1 or version 2. To find out what version your device is follow these steps:
 Firmware upgrade instructions

Download firmware and upgrade tool
Install "Tablet Product Tool(Developer Edition) 1.02" on your PC
Shut down device
Press and hold Volume + and connect the USB cable to PC
Install USB drivers
Launch "Tablet Product Tool(Developer Edition) 1.02" on your PC
Select all required files and press Run to start upgrade process
Once finished unplug USB cable and long press power button for 8 seconds to boot device
First boot after upgrade may take up to 2 min
 For NOVO 10 Captain v2 devices: update on 9/24/2013
Ainol Captain Android 4.2.2 – 2013-9-24
For NOVO 10 Captain v2 devices: update on 8/20/2013
Ainol Novo10 Captain 2013.08.20 V2.rar – 437.75 MB
For NOVO 10 Captain v1 devices: update on 8/12/2013 (Captain sold by uPlay Tablet is this version)
Ainol_Captain_20130812.rar – 428.31 MB
For Hero II v1 devices:
Hero II Quad Core – Android 4.2.2 (v1) – Upgrade firmware
For Hero II v2 devices:
Hero II Quad Core – Android 4.2.2 (v2) – Upgrade firmware
Upgrade Utility – All Devices:
Pad Product Tool – Upgrade Utility

GPGDragon Ver 3.37C Boom New Update Free Download 14-12-2013

GPGDragon Ver 3.37C **** Boom ****

Adjust Coolsand/RDA [Read Flash ]
Adjust Coolsaand/RDA CPU_ID 880A7000 CPU
Add Coolsand/RDA [ Format (beta) ]
Adjust SPD 6820/8810 Bin Flash File VMG Block Write
MTK 6582 Add Read Info/Read Flash/Format/IMEI Repair
Fix some bugs
Mediafire Download
4Shared Download