Followers

Download New NokiaCareSuiteForStore-2012_51_4_4 ( FREE ) ( Direct Link)

Download New NokiaCareSuiteForStore-2012_51_4_4 ( FREE ) ( Direct Link)

Quote:
1. New features in the Care Suite 5.0
  • New version of Application Launcher with FiRe authentication:
New Care Pro channel requires login. Currently used Care Suite external channel is still available, it doesn’t require login.
In the future (P1 2013 is the target), Care Suite external channel will be ramped down.(SR3456)
If user gives NOL login credentials three times wrong, the account will be blocked for security reasons.
If account is blocked please try again in half an hour.

  • New version of Fuse UI. Functionalities are basically the same.
  • Data package download solution is renewed.
  • WP8 HW components’ ids are added to product info. They can be shown in test mode.
  • WP8 ALS and proximity sensor calibrations are added for RM-846, RM-867, RM-822 (SR3457).
  • WP8 gyroscope calibration is added for RM-867, RM-822.
  • Detailed recovery instructions with pictures are updated for RM-846.
  • WP8 device reboot is implemented to be done every time when problem occurs during flashing and device would stay in interrupted flash mode.
  • WP8 microphone test is improved.
2. Changes & Error corrections from previous version

  • Dynamic camera configuration solution is fixed.
  • DP selection bug in WP8 manual recovery is fixed.
  • WP8 battery level check is improved so that real battery level check is done for device with PR1.1 SW. (For older SW versions the UI notification is shown every time in the beginning of a refurbish operation.


Please note: Offline installation: Uninstall previous version (2012.44.5) manually before installing this version.
Only the new Common Data Package Location (SR1315) is supported by default. If you need to use other Data Package Locations, they need to be added to the preferences manually.
Do not use Care Suite 4.0 and 5.0 simultaneously. They can be installed on the same PC and launched from the Nokia Application Launcher but not run at the same time.
If it seems that all features are not available on the left hand side of the screen, please click the small arrow next to the list. More features will be shown. This may happen if your screen is not maximized.
Lumia / Windows phones will reboot when they are disconnected - please wait for the phone to restart
Installation of FUSE drivers may take a long time. Therefore it is recommended that the Windows Automatic Driver Installation is disabled from the Control panel. Please go to Windows Control Panel -> System ->Advanced System Settings ->Hardware ->Device Installation Settings and select "Never install driver software from Windows Update"
PC must be connected to network, meaning that Ethernet cable must be connected to PC and connection needs to be configured to work properly. PC must be able to connect to for example internal network, but it is not necessary that PC has an online connection to Internet.


3. Known errors & limitations
Informing user about corrupted data package doesn’t work. Error message is not shown in case data package is corrupted
Battery level check UI notification is shown every time before flashing of WP8 device because battery level check is not yet supported on device side.
FLS-5 Drivers included in the installation package do not support 64-bit WIndows operating systems. Therefore Care Suite PST can not be used for servicing phones which use FLS-5 (USB_FBUS) connection.
Please do not use diacritical signs when selecting installation path for NCS.
Recovery or Refurbishment Flashing for Lumia Series Devices may fail on first attempt. Please try again, it works the second time around
Pictures will disappear during Series 40 device SW Update. This is related to product specific data package configuration Asha drivers don’t install when devices are connected via USB hub (on win7). Hub works if user installs drivers first via straight USB connection.

PST release 5.0 can be installed on the same PC with all current Nokia Service Software Applications, but simultaneous use with earlier PST version 4.0 is not possible

4. Reporting errors (manual reporting)
• Care Suite has been activated to the Genius – tool so error reporting works the same way as for the Phoenix Service Software. Please include log files, detailed description on how to reproduce the problem and screen shot to the case
• When reporting Nokia Care Suite errors, please attach application log files (if applicable). If error is reproduce able, please delete old existing log files, start service software, reproduce the error and then attach the log files to Genius case.


5. ZIP Package generator for reporting errors
You can use the ZIP Package Generate tool (Envira) to create a ZIP package with necessary files to report an error. Please do the following steps to generate the ZIP package file:
1. Launch troubleshooting application
2. Select which tool logs you need to generate (PST.MSU etc.)
3. In hours define period from which log files will be gathered in the ZIP package.
4. Press Create button and wait a while. When ZIP package is generated the content is displayed:
5. Press show Zip Folder button to open Explorer window with folder containing the generated ZIP package:
6. Notice that the generated ZIP package is highlighted by default. The ZIP packages should be removed manually when they are not needed any more.
7. Attach the generated ZIP package to the Genius Case.
8. Brief step by step description about how the error can be reproduced should be attached to the Genius Case.
9. Please also attach screen shot of error to the Genius Case.

6. HW & Tool requirements:
Please refer to Documents SR998 and SR999 in KICS Information Center.
7. Instructions for installation & use
User guide document and elearning material for Care Suite are downloadable from Nokia Online (NOL). Please check the availability of documentation from your local NOL (www.nokiaonline.com)
Care Suite 5.0 can be installed on the PC with all current Service Software versions which use the FUSE connection manager, but not run simultaneously with Care Suite 4.0.
Before you start Phoenix or care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
Please make sure that you have all the latest Windows updates installed.
Care Suite installation and use does not require that a dongle (PK-1, PKD-1 or FLS-5) is connected to PC. FLS-5 is only used for FBUS communication to phones which do not support direct USB connection

8. Supported products:

RM-761, RM-763, RM-781, RM-799, RM-800, RM-813, RM-884, RM-803, RM-809, RM-807, RM-832, RM-834, RM-810, RM-811, RM-812, RM-827, RM-837, RM-871, RM-808, RM-823, RM-802, RM-835, RM-836, RM-849, RM-724, RM-725, RM-819, RM-801, RM-596, RM-601, RM-609, RM-626, RM-639, RM-640, RM-659, RM-662, RM-670, RM-675, RM-679, RM-691, RM-692, RM-693, RM-694, RM-702, RM-704, RM-707, RM-718, RM-730, RM-749, RM-750, RM-754, RM-772, RM-774, RM-775, RM-776, RM-779, RM-766, RM-767, RM-768, RM-696, RM-714, RM-872, RM-873, RM-862, RM-863, RM-864, RM-824, RM-825, RM-826, RM-845, RM-867, RM-846, RM-852, RM-821, RM-820, RM-822, RM-889, RM-898, RM-907, RM-878, RM-838, RM-843, RM-844, RM-911, RM-913, RM-914, RM-915, RM-917, RM-918, RM-923, RM-885, RM-887, RM-860


9. Release history:
Version 2012.45.4

New features:

Light test is added for WP8 devices.
Detailed recovery instructions with pictures are done for WP8 devices.
Multi refurbish is enabled for WP8 devices.
For maximum 16 device simultaneous refurbish requires this setup:
-Use a PC that has at least four independent USB 2.0 host controllers.
-Connect no more than one powered external USB hub to each host controller
Each external hub must have its own independent power source, with the capability to supply at least 500 mA per device connected to it.
-Connect no more than four devices to each hub.
-Result: no more than these four devices will share the entire bandwidth of a single USB host controller,
and according to our testing, this is sufficient throughput at the current time for reliable use
of the USB bus when doing Windows Phone 8 device flashing.

Changes & Error corrections from previous version

SIM and memory card tests are updated for WP8 devices.
Menus are fixed for RM-843 and RM-852. These are disabled in this release for them: SW Reset, Touchpad calibration, ALS test and ALS calibration
.


-------------------------------------------------------------------------------------------------------------------------------------------------------------

Version 2012.44.5

New features:
• SUpport For WP8 devices:
Refurbish and recovery
User is notified to remove existing memory card from the device before flashing.
HW tests: Self test, Touch Display test, Display test, Vibra test, SIM test, Keyboard test, Memory card test,
Microphones test, Accelerometer test and Audio Output test.
Mode changer, having also Power Off feature.
Type Label Printing.
Multi IMEI Reader.
• SW Update feature is removed.
• Support for new products: RM-824, RM-825, RM-826, RM-845, RM-867, RM-846, RM-821, RM-820, RM-822, RM-878, RM-913, RM-914, RM-915, RM-917, RM-918, RM-923, RM-885, RM-887, RM-860.

Changes & Error corrections from previous version

• SW Update feature is removed.
-------------------------------------------------------------------------------------------------------------------------------------------------
Version 2012.40.5
New features:

- Support for new products: RM-832, RM-838, RM-843, RM-844, RM-852, RM-862, RM-863, RM-864, RM-872, RM-873, RM-889, RM-898, RM-907, RM-911

Changes & Error corrections from previous version

- Windows XP operating system is not supported.( This release is not tested on Windows XP but it can work on XP.)
- Change to Babel crash files sending is done: Crash file will be checked from the device only once per client session.
When Fire connection is offline: Let’s remove crash file from the device and store it only to the PC
- Fix to this error in WP7 Multi refurbish is done: Refresh different connection in FuseUI has caused refurbish fail. It is now fixed.
- Automatic application update will be now also possible.
- Failed Phone info rows are not shown.
--------------------------------------------------------------------------------------------------------------------------------------------
Version 2012.22.1

New features:
- PST and Multi SW updater is by default online when installing on a clean machine. Existing configuration file is not overwritten so in case you have PST and multi sw updater existing, please go to File -> Preferences -> Network to change the application startup mode.
- Modifiable AT&T refurbish XML log files location is done. Log format and location can be selected in Preferences.
- Better solution of CDMA support for refurbish log is implemented: An extra xml node is added to product configuration to determine the cdma device and create a shared plugin that will share this information to everyone who needs it.
- CDMA Settings plug-in that can be managed with device specific feature configuration is done. CDMA info is shown only for: RM-802 and RM-836.
- Support for .NET 4.0 is added.
- Recovery instructions with device pictures for Nokia Lumia devices are added.
- Battery level check for RM-696 is added.
- Audio loopback test is removed.
- Recovery plug-in is disabled for Prommer connections. Recovery has to be done via direct USB.
- Minor modification to sw update logo is done.
- Troubleshooting tool (Envira) is added to Care Suite Application Launcher. It can be now run separately
- Product Code Change plug-in is renamed to Language Package Change. Please note that this plug-in doesn’t interact with Tucson so real product code change can’t be done with this plug-in. (Only selected software content can be flashed using this option.)
- Selftests’ Overview text in UI is changed to inform user to execute self-tests in local mode instead of test mode.
- Tone Generator tests are limited to Speaker and IHF (earlier Buzzer).
- Support for new products: RM-714, RM-766, RM-767, RM-768, RM-806, RM-884.
- Also, support for all products supported by the latest Testing and Tuning tool release are added in this release

---------------------------------------------------------------------------------------------------------------------------------------------
version 2012.12.5

New features:
-Support for new products: RM-696, RM-724, RM-725, RM-802, RM-807, RM-810, RM-811, RM-827, RM-832, RM-833, RM-834, RM-835, RM-836, RM-849, RM-837, RM-871
-Full feature set enabled for RM-761, RM-763, RM781, RM-799, RM-800, RM-813, RM-807,
-Multi SW Updater is enabled.(It is not enabled for all devices.) The recommendation is to use it with up to five devices that are the same model and start the refurbish to every device simultaneously.
-CDMA Phone Info for Lumia CDMA devices is added.
-CDMA phone info added also to refurbish log.
-Recovery is enabled also for Nokia Lumia 800
-AT&T refurbish XML format is supported also in Multi SW Updater.
-Camera configuration for RM-724, RM-725 is added.
-FiRe online functionality is enabled
-Life Timer display for Lumia devices is supported

Changes & Error corrections from previous version

PC must be on-line in a sense that at least Ethernet connection with internal network or other PC needs to be configured and working. Internet connection is not required.
Driver installation for Fuse drivers takes very long time so windows automatic driver installation is recommended to be disabled.
Go to: Control Panel -> System -> Advanced System Settings -> Hardware -> Device Installation Settings-> Never install driver software from Windows Update.

The necessary functionality of NokiaUsbReqTool.zip is integrated into this release.
It is meant for resolving occasional Lumia refurbish failure on Windows XP machines.
The root cause of the refurbish failure is that device driver installation can’t be finished in time on XP.
Device gives timeout after 30 seconds. After driver installation has failed once, every retry will fail on the same port with the similar devices.
With NokiaUsbReqTool.zip, serial number can be ignored with device PID. In practice it means that drivers will be installed only once per physical port.

When servicing Nokia Windows Phones / Lumia Series devices Microsoft Zune installation is not required anymore
---------------------------------------------------------------------------------------------------------------------------------------------
10. Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (
http://www.openssl.org/).
Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
Copyright (c) 1995-1998 Eric Young (
eay@cryptsoft.com). All rights reserved.
OpenSSL license text can be found from
http://www.openssl.org/source/license.html

Nokia C5-03 mmc ic location and compatibility solution

Android Tablets Flasher & Firmwars DOWNLOAD

Flasher & Firmwars 
DOWNLOAD

Any types of Android Os and Flasher + manual +video manual and Much More !!!!

Xtouch

Model :X708S #1 HC_Screen
Firmware download from here
Manual And Tool download from here

-----------------------------------
Model :

  • X708S #2 CPT_Screen download from here here
  • Tool and manual download from here
-------------------------------------------
Model :

  • X708S Normal firmware download from
  • Tool and manual download from here 

  • model X401 firmware download from here
    Tool and manual download from here

    model : X402

    firmware download from here
    Tool and manual download from here 

  • model X401 firmware download from here
    Tool and manual download from here

    model : X402

    firmware download from here
    Tool and manual download from here 
  •  
  • model :X506
    firmware download from
    here
    Tool and manual download from here
    ----------------------------------------

    Model :X704

    Firmware download from here
    Tool and manual download from here 

  • Model :X705
    firmware download from
    here

    Tool and manual download from
    here

    --------------------------------

    model :

    X706

    firmware download from here
    tool and manual download from
    here
  • model :
    X707

    firmware download from
    here
    tool and manual download from here
    -----------------------
    model :
    X707S
    firmware download from here
    tool and manual download from here
     
  • model :
    X708

    firmware download from here
    tool and manual download from here
    --------------------------------

    model :


    X714

    firmware download from here
    tool and manual download from here
     
  • model :
    X716
    , X804 , X807 firmwares download just click on model name
    Tool and manuals for these model,s download from
    here

    models :

    X808
    ,X817,X906,
    X907


    tool and manual download from here 

WhatsApp Messenger IPA [iPhone Download]

WhatsApp Messenger IPA [iPhone Download]



*******************

WhatsApp messenger is a cross platform smartphone messenger currently available for iPhone, Android, BlackBerry and Nokia phones. The application utilizes push notifications to instantly get messages from friends, colleagues and family. Switch from SMS to WhatsApp to send and receive messages, pictures, audio notes, and video messages at no cost.

All features are included without the need for extra in-application purchases.
* NO HIDDEN COST: Once you and your friends download the application, you can use it to chat as much as you want. Send a million messages a day to your friends for free! WhatsApp uses your Internet connection: 3G/EDGE or Wi-Fi when available.
* MULTIMEDIA: Send Video, Images, and Voice notes to your friends and contacts.
* NO INTERNATIONAL CHARGES: Just like there is no added cost to send an international email, there is no cost to send WhatsApp messages internationally. Chat with your friends all over the world as long as they have WhatsApp Messenger installed and avoid those pesky international SMS costs.
* SAY NO TO PINS AND USERNAMES: Why even bother having to remember yet another PIN or username? WhatsApp works with your phone number, just like SMS would, and integrates flawlessly with your existing phone address book.

* NO NEED TO LOG IN/OUT: No more confusion about getting logged off from another computer or device. With push notifications WhatsApp is ALWAYS ON and ALWAYS CONNECTED.
* NO NEED TO ADD BUDDIES: Your Address Book is used to automatically connect you with your contacts. Your contacts who already have WhatsApp Messenger will be automatically displayed under Favorites, similar to a buddy list. (You can of course always edit Favorites any way you like)
* OFFLINE MESSAGES: Even if you miss your push notifications or turn off your iPhone, WhatsApp will save your messages offline until you retrieve them during the next application use.
* STATUS: Use the status feature of WhatsApp to inform your contacts if you are busy, in a meeting, at the gym, or available for a chat.

What’s New in Version 2.8.7

- fix multimedia sharing in iOS 4.3 (sorry)
- many bug fixes and crash fixes
- in iOS 6 open shared locations in native Maps app
- fix "All Media" navigation flow
- many other optimizations and improvements

Screenshots




WhatsApp Messenger IPA [iPhone/iPod Download]

VERSION 2.8.7

TuneIn Radio Pro IPA [iPhone/iPod/iPad Download]

TuneIn Radio Pro IPA [iPhone/iPod/iPad Download]



*****************

Named one of the Top 40 iPhone Apps of 2010 by TechCrunch!
"TuneIn Radio, with stations and features galore, is pretty much the ultimate iOS radio app."
"The Best Radio App for the iPhone!"
- AppJudgment

"There are some iPhone apps that it is worth parting with money for, and this is one of them."
- TechCentral.ie – Editor’s Choice ✭✭✭✭✭

"…its features are incredibly well designed, and it’s far better than the low price suggests."
- MacUser – ✭✭✭✭✭

"While there are plenty of internet radio apps for iPhone, you’d be hard pressed to find one as fully featured as TuneIn Radio."
- TechRadar – ✭✭✭✭✭
_____________________________________________

See if your favorite stations are available by visiting tunein.com.

TuneIn Radio is powered by RadioTime—the best radio directory available including music, talk, sports and news stations from all over the world. With RadioTime, you get more than just a list of stations. You get a radio guide that helps you find the shows and stations that matter to you.

Plus, with TuneIn Radio, you can pause and rewind live radio just like your DVR.

KEY FEATURES
• Record any station for playback later (on demand or with record timer)
• Alarm Clock
• Play MP3 and AAC stations in the background in Safari on non-multitasking capable devices
• RadioTime directory featuring 40,000+ radio stations and thousands of radio shows
• Simple, quick, and easy-to-use interface
• Browse or search for your favorite shows and find out what stations they’re currently available on
• Browse local stations with GPS or WiFi location
• Search for stations by keyword
• Browse stations by genre or location
• Pause live streams for up to 30 minutes
• Rewind and fast forward within last 30 minutes streamed
• Listen to podcasts of radio shows when available
• Bookmark your favorite stations, categories or shows
• Sleep timer
• Search for stations playing your favorite song or artist

What’s new in Version 3.3

New:
• Our iPad listeners will enjoy a brand new design!
• TuneIn will pick up right where you left off when you resume listening to your most recent recording or podcast.
• Listen to 24 college ******** bowl games

Improved:
• We’ve improved streaming stability for a number of formats.

Screenshots




TuneIn Radio Pro IPA [iPhone/iPod/iPad Download]

Version: 3.3

[New Apps 2012] iPhone/iPod/iPad New Apps Request & Download Only Here [Apps Only]

Camera+​ IPA Download [iPhone/iPod]



******************


It’s all about one thing… GREAT PHOTOS!

Whether you’re a seasoned photographer or someone who’s barely touched a camera, Camera+ will make you love taking photos.

Everybody has a creative side… Camera+ will help bring that creativity out in you, all with a fun, innovative, and beautiful design.

★ EXCLUSIVE Touch Exposure & Focus for the ultimate control…
Set exposure separately from focus for the ultimate control of your shots… simply touch with a 2nd finger while focusing to adjust exposure until your shot is perfect. [available on iPhone 4 and 3GS on iOS4 only]

★ EXCLUSIVE Photo Flashlight to brighten up your photos…
Use the iPhone 4 LED flash as a continuous fill light to improve photo quality, especially for portrait and macro shots.

★ No more blurry shots…
Use the stabilizer to steady your camera and get the sharpest pics you can.

★ Put an end to crooked pics…
Use the grid to line up your shots and eliminate unsightly angled photos.

★ Highest quality zoom…
Camera+ has a 6× digital zoom that simply ****s away the competition in terms of quality.

★ Scene modes and flash…
Most modern digital cameras all have scene modes to help you get the best photos for your particular situation. And why shouldn’t your iPhone have this great feature? Well, with Camera+, you get to choose from several scene modes including Backlit, Sunset, Night, Portrait, Beach, and many more. If you just want great looking shots with the least amount of fuss, just tap Auto and watch your lifeless pics come alive. And for the times when your photos came out too dark, we have a high quality digital flash to make them look great.

★ Crops let you frame your pics perfectly…
If you didn’t line up your shot perfectly when you took it, you can easily fix that with Camera+. And when you want to get a bit creative, we setup a bunch of popular crop sizes for you. With a single tap, you can make your pics square, 4×6, 8×10, etc. We’ve even included a “golden ratio” crop to get the most aesthetically pleasing results.

★ Dozens of amazing effects…
We partnered with professional photographer, Lisa Bettany, to bring you a slew of stunningly beautiful effects. With a single tap, you can transform a soulless pic into a work of art. Make your photos shimmer with “HDR”… get down and dirty with “Grunge”… fill your pics with emotion and despair with “So Emo”. And this is just the tip of the iceberg… there are dozens of 1-touch effects for you to experiment with so that you can get the perfect result every time.

★ Wrap it all up with stylish borders…
With Camera+, you get several great border designs so that you can put the finishing touch on your photos.

What’s New in Version 3.7.1

’Twas the night before Christmas, when all through the App Store,

Not a creature was stirring, not even a Spore.

Some crash bugs were fixed with the greatest of care,

So that you, our beloved Camera+ user, could take photos with flair!

We’ll never do shady things with your shared pics because it just isn’t right.

And on that note… Happy Christmas to all, and to all a good night!









Camera+ IPA [iPhone/iPod Download]

Version: 3.7.1

Samsung T459 Hwk Support Flash File


T459VIHL3_H3.zip

Download

 

 




GPGJtag V2.2 World First as Always

Download iPhone Firmware Files Free Download

1.0.0: iPhone1,1_1.0_1A543a_Restore.ipsw
1.0.1: iPhone1,1_1.0.1_1C25_Restore.ipsw
1.0.2: iPhone1,1_1.0.2_1C28_Restore.ipsw
1.1.1: iPhone1,1_1.1.1_3A109a_Restore.ipsw
1.1.2: iPhone1,1_1.1.2_3B48b_Restore.ipsw
1.1.3: iPhone1,1_1.1.3_4A93_Restore.ipsw
1.1.4: iPhone1,1_1.1.4_4A102_Restore.ipsw
2.0.0 (2G): iPhone1,1_2.0_5A347_Restore.ipsw
2.0.0 (3G): iPhone1,2_2.0_5A347_Restore.ipsw
2.0.1 (2G): iPhone1,1_2.0.1_5B108_Restore.ipsw
2.0.1 (3G): iPhone1,2_2.0.1_5B108_Restore.ipsw
2.0.2 (2G): iPhone1,1_2.0.2_5C1_Restore.ipsw
2.0.2 (3G): iPhone1,2_2.0.2_5C1_Restore.ipsw
2.1.0 (2G): iPhone1,1_2.1_5F136_Restore.ipsw
2.1.0 (3G): iPhone1,2_2.1_5F136_Restore.ipsw
2.2.0 (2G): iPhone1,1_2.2_5G77_Restore.ipsw
2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw
2.2.1 (2G): iPhone1,1_2.2.1_5H1_Restore.ipsw
2.2.1 (3G): iPhone1,2_2.2.1_5H11_Restore.ipsw
3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw
3.0.0 (3G): iPhone1,2_3.0_7A341_Restore.ipsw
3.0.0 (3GS): iPhone2,1_3.0_7A341_Restore.ipsw
3.0.1 (2G): iPhone1,1_3.0.1_7A400_Restore.ipsw
3.0.1 (3G): iPhone1,2_3.0.1_7A400_Restore.ipsw
3.0.1 (3GS): iPhone2,1_3.0.1_7A400_Restore.ipsw
3.1.0 (2G): iPhone1,1_3.1_7C144_Restore.ipsw
3.1.0 (3G): iPhone1,2_3.1_7C144_Restore.ipsw
3.1.0 (3GS): iPhone2,1_3.1_7C144_Restore.ipsw
3.1.2 (2G): iPhone1,1_3.1.2_7D11_Restore.ipsw
3.1.2 (3G): iPhone1,2_3.1.2_7D11_Restore.ipsw
3.1.2 (3GS): iPhone2,1_3.1.2_7D11_Restore.ipsw
3.1.3 (2G): iPhone1,1_3.1.3_7E18_Restore.ipsw
3.1.3 (3G): iPhone1,2_3.1.3_7E18_Restore.ipsw
3.1.3 (3GS): iPhone2,1_3.1.3_7E18_Restore.ipsw
4.0.0 (3G): iPhone1,2_4.0_8A293_Restore.ipsw
4.0.0 (3GS): iPhone2,1_4.0_8A293_Restore.ipsw
4.0.0 (4): iPhone3,1_4.0_8A293_Restore.ipsw
4.0.1 (3G): iPhone1,2_4.0.1_8A306_Restore.ipsw
4.0.1 (3GS): iPhone2,1_4.0.1_8A306_Restore.ipsw
4.0.1 (4): iPhone3,1_4.0.1_8A306_Restore.ipsw
4.0.2 (3G): iPhone1,2_4.0.2_8A400_Restore.ipsw
4.0.2 (3GS): iPhone2,1_4.0.2_8A400_Restore.ipsw
4.0.2 (4): iPhone3,1_4.0.2_8A400_Restore.ipsw
4.1.0 (3G): iPhone1,2_4.1_8B117_Restore.ipsw
4.1.0 (3GS): iPhone2,1_4.1_8B117_Restore.ipsw
4.1.0 (4): iPhone3,1_4.1_8B117_Restore.ipsw
4.2.1 (3G): iPhone1,2_4.2.1_8C148_Restore.ipsw
4.2.1 (3GS): iPhone2,1_4.2.1_8C148a_Restore.ipsw
4.2.1 (4): iPhone3,1_4.2.1_8C148_Restore.ipsw
4.2.6 (4 CDMA): iPhone3,3_4.2.10_8E600_Restore.ipsw
4.3.0 (3GS): iPhone2,1_4.3_8F190_Restore.ipsw
4.3.0 (4 GSM): iPhone3,1_4.3_8F190_Restore.ipsw
4.3.1 (3GS): iPhone2,1_4.3.1_8G4_Restore.ipsw
4.3.1 (4 GSM): iPhone3,1_4.3.1_8G4_Restore.ipsw
4.3.2 (3GS): iPhone2,1_4.3.2_8H7_Restore.ipsw
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw
4.2.7 (4 CDMA): iPhone3,3_4.2.7_8E303_Restore.ipsw
4.2.8 (4 CDMA): iPhone3,3_4.2.8_8E401_Restore.ipsw
4.3.3 (3GS): iPhone2,1_4.3.3_8J2_Restore.ipsw
4.3.3 (4 GSM): iPhone3,1_4.3.3_8J2_Restore.ipsw
4.2.9 (4 CDMA): iPhone3,3_4.2.9_8E501_Restore.ipsw
4.3.4 (3GS): iPhone2,1_4.3.4_8K2_Restore.ipsw
4.3.4 (4 GSM): iPhone3,1_4.3.4_8K2_Restore.ipsw
4.2.10 (4 CDMA): iPhone3,3_4.2.10_8E600_Restore.ipsw
4.3.5 (3GS): iPhone2,1_4.3.5_8L1_Restore.ipsw
4.3.5 (4 GSM): iPhone3,1_4.3.5_8L1_Restore.ipsw
5.0 (3GS): iPhone2,1_5.0_9A334_Restore.ipsw
5.0 (4 GSM): iPhone3,1_5.0_9A334_Restore.ipsw
5.0 (4 CDMA): iPhone3,3_5.0_9A334_Restore.ipsw
5.0 (4S): iPhone4,1_5.0_9A334_Restore.ipsw
5.0.1 (3GS): iPhone2,1_5.0.1_9A405_Restore.ipsw
5.0.1 (4 GSM): iPhone3,1_5.0.1_9A405_Restore.ipsw
5.0.1 (4 CDMA): iPhone3,3_5.0.1_9A405_Restore.ipsw
5.0.1 (4S): iPhone4,1_5.0.1_9A405_Restore.ipsw
5.0.1 (4S) [9A406]: iPhone4,1_5.0.1_9A406_Restore.ipsw
5.1.0 (3GS): iPhone2,1_5.1_9B176_Restore.ipsw
5.1.0 (4 GSM): iPhone3,1_5.1_9B176_Restore.ipsw
5.1.0 (4 CDMA): iPhone3,3_5.1_9B176_Restore.ipsw
5.1.0 (4S): iPhone4,1_5.1_9B179_Restore.ipsw
5.1.1 (3GS): iPhone2,1_5.1.1_9B206_Restore.ipsw
5.1.1 (4 GSM): iPhone3,1_5.1.1_9B206_Restore.ipsw
5.1.1 (4 GSM Build 9B208): iPhone3,1_5.1.1_9B208_Restore.ipsw
5.1.1 (4 CDMA): iPhone3,3_5.1.1_9B206_Restore.ipsw
5.1.1 (4S): iPhone4,1_5.1.1_9B206_Restore.ipsw
6.0.0 (3GS): iPhone2,1_6.0_10A403_Restore.ipsw
6.0.0 (4 GSM): iPhone3,1_6.0_10A403_Restore.ipsw
6.0.0 (4): iPhone3,2_6.0_10A403_Restore.ipsw
6.0.0 (4 CDMA): iPhone3,3_6.0_10A403_Restore.ipsw
6.0.0 (4S): iPhone4,1_6.0_10A403_Restore.ipsw
6.0.0 (5 GSM): iPhone5,1_6.0_10A405_Restore.ipsw
6.0.0 (5 CDMA): iPhone5,2_6.0_10A405_Restore.ipsw
6.0.1 (3GS): iPhone2,1_6.0.1_10A523_Restore.ipsw
6.0.1 (4 GSM): iPhone3,1_6.0.1_10A523_Restore.ipsw
6.0.1 (4): iPhone3,2_6.0.1_10A523_Restore.ipsw
6.0.1 (4 CDMA): iPhone3,3_6.0.1_10A523_Restore.ipsw
6.0.1 (4S): iPhone4,1_6.0.1_10A523_Restore.ipsw
6.0.1 (5 GSM): iPhone5,1_6.0.1_10A525_Restore.ipsw
6.0.1 (5 CDMA): iPhone5,2_6.0.1_10A525_Restore.ipsw
6.0.2 (5 GSM): iPhone5,1_6.0.2_10A551_Restore.ipsw
6.0.2 (5 CDMA): iPhone5,2_6.0.2_10A551_Restore.ipsw