If something doesn't working right, try restarting iPhone, force quitting an application,
or resetting iPhone.
iPhone 5 ios6
Restart iPhone 5: Press and hold the On/Off Sleep/Wake button until the red slider
appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on,
press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can't turn off iPhone or if the problem continues, you may need to reset iPhone.
A reset should be done only if turning iPhone5 off and on doesn't resolve the problem.
Force quit an application: Press and hold the On/Off Sleep/Wake button on top of
iPhone for a few seconds until a red slider appears, then press and hold the Home
button until the application quits. On iPhone 3GS or later, you can also remove an
application from the recents list to force it to quit.
If your Compaq Aero 2100 Series locks up and stops responding due to a
hardware or software malfunction, you may need to reset your device.
Your device can be reset in two ways, depending on the situation. A
normal reset does not affect data that has been saved in memory. A full
reset erases memory contents and settings. Resetting your device does not affect the operating system.
Performing a Normal Reset
A normal reset restarts your device much like pressing Ctrl+Alt+Del restarts a computer.
To perform a normal reset:
1. Save all work.
IMPORTANT: Do not turn off the device as the device must remain on in order to reset.
2. Turn over the device.
3. Use the tip of the stylus to press the reset button.
4. The device automatically restarts.
1 Reset button
The Reset button is recessed inside the case of the device. Occasionally, some hardware or software malfunctions can
prevent the device from responding. To get the device working again, use the tip of the stylus to press the Reset button.
CAUTION: When you use the Reset button, you will lose any data that has not been saved.
Performing a Compaq Aero 2190 Full Reset - Hard reset
A full reset restarts your device and removes all information stored
in RAM memory such as data files and system settings. Perform a full
if a normal reset does not solve the system lockup or failure.
NOTE: If you have saved your data using one of the backup procedures,
it is possible to restore your saved data after performing a full
To perform a full reset:
1. Disconnect the device from the AC Adapter, if using external power.
2. Turn over the device.
3. Remove both the main battery and the backup battery.
4. Wait at least 1 minute, then replace the batteries.
5. Turn over the device, then press the power button to restart the device.
6. Run through the Setup Wizard again to reestablish your system and calibration settings.