Unlock iPhone 4 & 3GS iOS 6.1.3 with Custom Firmware

What’s required before you start:

Ultrasn0w 1.2.8 (only for compatible basebands).
LINKE ultrasnow 1.2.8 - Download - 4shared - asif tcn

iPhone 4 baseband 01.59.00 (that ultrasn0w supports), or 03.10.01, 02.10.4, 04.10.01 (Gevey SIM unlock method). iPhone 3GS is also for the solution on basebands 05.12.01, 05.13.04, 05.11.07 and also the famous iPad baseband 06.15.00.
Sn0wbreeze 2.9.14

Important note: Remember to back up your files before you start with any such guide.

First Part: Custom IOS 6.1.3 firmware for Baseband preservation

Step 1: Download IPSW for iOS 6.1.3 for iPhone 3GS or iPhone 4. It’s recommended that you take the official download route and save it for later use.



Step 2: Download Sn0wbreeze 2.9.14 and launch it.

Step 3: Select browse and search for the IPSW iOS 6.1.3 file downloaded in step 1.

Step 4: Select next after sn0wbreeze identifies the file.

Step 5: Select one of the follow modes:

Expert mode: baseband preservation, activates and jailbreaks.
iFaith Mode: iOS custom firmware built and attaches it to the saved SHSH blobs.
Simple Mode (mostly recommended): jailbreaks, hacktivates and preserves the baseband.

Step 6: Select Yes when you’re asked that you want to hacktivate or otherwise and wait for the process to complete.



ur desktop is going to display the custom firmware once the process ends. Before you go ahead and restore your device, the iPhone SHOULD BE PLACED into DFU mode through iREB. This makes it easy for the phone to accept custom firmware and bypass the error message displayed during restoration. iREB is located on sn0wbreeze’s menu bar and is available after the custom firmware is built.
First of all, make sure you’re in DFU mode before restoring. The black screen stands for DFU mode. Next, open iTunes, tap shift on the computer keyboard and select restore. Choose the custom firmware that was made. The file name is going to be like sn0wbreeze_iPhone+xxxxx.


Second part: Ultrasn0w 1.2.8 iOS 6.1.3 unlock via Cydia

Open Cydia and head over to Manage > Sources > Edit > Add: ultrasn0w.com.
Locate ultrasn0w 1.2.8 and install it.
Restart the phone but use iBooty to start iPhone as A4 and new 3GS phones have tethered.

Samsung P3100 Galaxy Tab 2 7.0 Firmware Update

Main Features of Samsung P3100:

• GSM 850 / 900 / 1800 / 1900.
• HSDPA 900 / 1900 / 2100.
• PLS LCD capacitive touchscreen, 16M colors.
• TouchWiz UX UI.
• MMC: microSD, up to 64 GB.
• Internal Memory: 8/16/32 GB storage, 1GB RAM.
• WI-FI 802.11 a / b / g / n, DLNA, Wi-Fi Direct, dual-band, Wi-Fi hotspot.
• Bluetooth: v3.0 with A2DP.
• Camera: 3.15 MP, 2048x1536 pixels.
• Android OS, v4.0.3 (Ice Cream Sandwich).
• CPU: Dual-core 1 GHz.
• GPU: PowerVR SGX540.
• A-GPS support and GLONASS.
• TV Out.
• SNS integration.
• MP4 / DivX / Xvid / H.264 / H.263 / WMV player.
• MP3 / WAV / eAAC+ / WMA / AC3 / Flac player.
• Organizer.
• Image / Video Editor.
• Quickoffice HD Editor / Viewer
• Google Search, Maps, Gmail,YouTube, Calendar, Google Talk, Picasa integration.
• Voice memo.
• Predictive text input (Swype).

Tools:

• Samsung P3100 Galaxy Tab 2 7.0 Firmware Package to under

Android 4.0.3:

• P3100XWALD2 / OJVALD3 Turkish
• P3100XXALD4 / OXEALD1 Russia

• Odin Flasher ( P3100 ).
• USB Driver

• After your download the wanted tools you have to extract them and install the USB drivers and then reboot your PC.

Firmware Update Steps:

• Run Odin Flasher and Check these: Re-Partition, Auto Reboot, F.Reset Time.
• Now you have to select the suitable PIT file according to your tablet type:

signed_espresso_20120220_16G.pit

Or

signed_espresso_20120220_8G.pit

• Now from the Extracted Firmware Package you have to select the Files like this:

BOOTLOADER: BOOTLOADER_P3100xxxxx_372946_REV04_user_low_ship.t ar.md5

PDA: PLATFORM_P3100xxxxx_372946_REV04_user_low_ship.tar .md5

PHONE: MODEM_P3100xxxx_REV_04_CL1128355.tar.md5

CSC: CSC_Oxx_P3100Oxxxxx_396275_REV04_user_low_ship.tar .md5

• Put the Tablet into Download Mode: Press Volume Down key + Power for 10 sec then press Volume Up key to enter Download Mode.
• Connect the Tablet to your PC by USB cable and install needed drivers.
• When the Tablet detected by Odin that mean all drivers is installed correctly.
• Now you can Click Start button and wait till the Tablet rebooted by Odin.
• If you see PASS! word in green on Odin's window that means the process was done with no errors.
• Disconnect your Tablet and Do Full Reset: *2767*3855#.

Maximus max 903 Many Pattern Reset Google account Done

Maximus Max 903 Google account Done



Power off the Phone press Volume Down +Power Button.
screen show Download mood then touch Home key.
screen show android System Recovery Utility
select option wipe data/Factory reset select with Volume key.
then touch menu key and flow screen information

VOLCANO

Format By Address :
Format addr: 0x125A0000 --Format length: 0xCA60000

Quote:

Analysis of USB port,Please insert phone USB cable. Connecting... CPU TYPE:6575 Hardware version:CB00 Software version:E201 Boot downloading complete! Flash ID: 00EC00BC Flash Type: NAND_K9K4G16Q0M Chip Capacity: 0x20000000(512MB) NFB bootloader downloading... Flash writing complete. >>Flash file C:\Documents and Settings\Omur Faruk\My Documents\Downloads\Compressed\MaxiMus Max903\MaxiMus Max903\[PreLoader_mt6575_detect_powerkey].bin has been written.

Download Now

Wintouch Q75 Firmwares, Flasher & Tools Download Here

model :Q75 firmware : Q75A30313.IMG , Q75A30312.IMG ,Q75A30310.IMG
Flasher+manual  download from here


model :Q75S firmware : 1 2 3
Flasher and manual download from fst post

model :Q74 firmware

Q74J30311.IMG Q74J30325.IMG

Flasher + manual download from here

Wintouch Q81 Firmwares, Flasher & Tools Download Here

Wintouch Q81

Download Firmware From Here

Download Flasher From Here

Wintouch Q72 Firmwares, Flasher & Tools Download Here

Wintouch Q72

Download Firmware From Here

Download Flasher From Here

Wintouch Q79 Firmwares, Flasher & Tools Download Here

Wintouch Q79

Download Firmware From Here

Download Flasher From Here

Wintouch Q73 Firmwares, Flasher & Tools Download Here

Wintouch Q73

Download Firmware From Here

Download Flasher From Here

Wintouch Q74 Firmwares, Flasher & Tools Download Here

Wintouch Q74

Download Firmware From Here

Download Flasher From Here

Wintouch M79 Firmwares, Flasher & Tools Download Here

Wintouch M79

Download Firmware From Here
Download Flasher From Here

Wintouch M76 Firmwares, Flasher & Tools Download Here

Wintouch M76

Download Firmware From Here

Download Flasher From Here

Wintouch Q75s Firmwares, Flasher & Tools Download Here

Wintouch Q75s

Download Firmware From Here

Download Flasher From Here

Wintouch Q75 Flasher & Tools Download Here

Wintouch Q75

Download Firmware From Here

Download Flasher From Here

How to Root the Galaxy S Blaze 4G

1. For the first step you must download the kernel described before along with the PIT file. You can get it from here (place it on the PC).
2. Install Odin and the run it.
3. In the Odin window click on the “PDA” option and then select the file downloaded in step one (the kernel one).
4. On the same Odin, click on the “PIT” option and select the second file downloaded in step 1.
5. Select the “auto reboot” option and leave the rest as they are, don’t make any other changes.
6. Take your phone and turn it off.
7. Reboot it by entering in download mode: hold down simultaneously the Volume Up and Volume Down buttons while powering on the device.
8. After that, connect the Blaze with the computer by using the USB cord.
9. In Odin you should see the “Added” message.
10. Click on “Start” in order to start rooting and installing the kernel.
11. In the end, the phone should reboot automatically and in Odin you should see the “Pass” message.
12. You can safely disconnect the handset from the PC by removing the USB cable.

Congratulations, your Samsung Galaxy S Blaze 4G is now rooted. You can start updating its OS or flash custom ROMs as the system is finally unchained and opened for changes. Do tell us how things works and if everything went fine.

Let’s install the Android ICS 4.0.4 firmware on the Huawei U8120

• urn on USB Debugging (Settings > Applications > Development > USB debugging) – enabled means checked.
• Disable any anti-virus on your PC or phone, as they could interfere with the update process.

1. Download the ClockWorkMod Recovery Package, ICS 4.0.4 Package and Google Apps on your PC and upload them to your phone via USB.
2. Unplug the USB cable, turn off the device and boot it in Recovery Mode (Power + Volume Up + Green Button).
3. Now that your phone is in Recovery Mode, select install zip from sd card and then choose zip from sd card. Now select the downloaded files in the same order mentioned earlier.
4. After the update is done, you will be taken back to Recovery Mode. Select ++++ Go Back ++++ and then reboot the system. If you encounter any problems, take the battery out and place it back in.

It’s as easy as that, now you have installed the Android ICS 4.0.4 on the Huawei U8120, have fun and watch out for new updates, as we will come with new updates every now and then.

Samsung Galaxy S4 on Android 4.2.2 Jelly Bean without Factory Reset

Root Verizon Samsung Galaxy S4 on Android 4.2.2 Jelly Bean without Factory Reset

• 
  
• 
  

 Samsung. Rooting your Verizon Galaxy S4 is easy and you will first need to flash a new kernel, run ODIN and flash the root files using Motochopper utility root exploit, while afterwards you will have to flash again the stock kernel for this device. In order to be sure that you easily flash the rooting files with success, you will need to take a look at the preparation guide below:

• this is a guide that works only with the Verizon variant of the Samsung Galaxy S4. Don’t try to use this guide with any other Galaxy S4 model, as you will end up bricking them.
• it works only with Windows computers.
• make sure that your PC has the Samsung USB Drivers installed – download link here.
• try and backup some of your most important before installing the root. I know I said that this guide won’t wipe any file from your smartphone, but, you should still save some files.
• this tutorial has 3 parts, the first one teaches you how to flash a pre-release VRUAMD2 kernel, the second one will help you root the device with Motochopper’s exploit tool, while the third part will show you how to re-flash the stock VRUAMDK stock kernel.
• make sure that the phone’s battery has enough power before starting the root process.
• if you cannot complete this guide, then you should ask for extra help in comments.

These were all the general guidelines that you had to go over. Now, below you will find all the files / tools download links, save them on your PC:
> Download Odin 3.07 here. Extract its contents after the download is complete and place them in a single folder on your computer.
> Download VRUAMD2 Pre-Release Kernel from HERE.
> Download VRUAMDK Stock Kernel from HERE.
> Download the Motochopper Root exploit utility from HERE. Unzip the file and save its contents into a folder.

[GUIDE] Samsung Galaxy S4 Sim-Unlocking

Follow steps carefully and correctly.[COLOR=LemonChiffon] Instructions: METHOD 1 1. Dial *#0011# 2. press Menu then tap BACK 3. press the Menu again the tap KEY INPUT then enter 1, press OK button 4. press Menu then tap BACK Your are now in the SERVICE MODE MAIN MENU Tap [1]UMTS then [1]DEBUG SCREEN then [6]PHONE CONTROL then [6]NETWORK LOCK then tap [3]PERSO SHA256 OFF Go back to the UMTS MAIN MENU by pressing Menu then Back then tap [6]COMMON then [6]NV REBUILD then tap [4]RESTORE BACK UP the device will freeze, black screen, Blue LED Light, Menu and Back key ON. Wait for it to reboot (about a minute). Your Samsung Galaxy I9505 is now Sim-Unlocked. ---------- METHOD 2 - artnada This is what I did. Slightly different to OP. I did this with my AUTHORISED Sim in first. 1. Dial *#0011# 2. press Menu then tap BACK 3. press the Menu again the tap KEY INPUT then enter 1, (wait a few seconds) it auto jumped into service menu. 4. press Menu then tap BACK (not needed for me) Your are now in the SERVICE MODE MAIN MENU Tap [1]UMTS (may auto go into next menu (mine did) then [1]DEBUG SCREEN then [6]PHONE CONTROL then [6]NETWORK LOCK then tap [3]PERSO SHA256 OFF Go back to the UMTS MAIN MENU by pressing Menu then Back (several times) then tap [6]COMMON then [6]NV REBUILD (if this does not work next time) do [4]RESTORE BACK UP the device will freeze, black screen, Blue LED Light, Menu and Back key ON. Wait for it to reboot (about a minute). Your Samsung Galaxy I9505 is now Sim-Unlocked. Edit: When I booted back in with AUTHORISED sim, I had to turn off Mobile Data, then turn it on. I then turned off the phone, put my UNAUTHORSIED Sim in, booted back up and NO NETWORK PIN request! Again, I had to turn off Mobile data, then turn it back on. The UNAUTHORSIED Sim worked!!!  My previously locked to Three UK GT-I9505 is now unlocked to all networks  Thanks again to XDA (Y) ---------- It has been reported that this is indeed a "permanent" unlock: artnada's tests: I had sim unlocked my phone when I was on the "djemby" pre-rooted I9505XXUAME2-DEODEXED-KNOX-FREE-HD-VOICE I have just re-flashed my original factory Three ROM. I9505XXUAMDC_I9505H3GAMD6_I9505XXUAMDC_HOME and the Sim unlock was still UNLOCKED! I then re-flashed back to I9505XXUAME2-DEODEXED-KNOX-FREE-HD-VOICE.tar.md5 and the sim unlock was still UNLOCKED! So, I think we can safely say this sim unlock method is a permanent unlock! Source XDA http://forum.xda-developers.com/show....php?t=2282683

New Update |*FuriousGold Samsung Unlocker | PACK12 |*v1.0.1.1

Direct Link: FuriousGold® The World Famous Unlocking Tool - Furious Samsung

Nemesis titanium a super custom rom for galaxy y s5360

AFTER IMMENSE POPULARITY OF NEMESIS ONE AND PHOENIX HERE IS THE NEMESIS TEAM BACK AGAIN WITH A AWESOME NEW ROM

NEMESIS TWOTM[codename~TITANIUM]

ROM IS BRACED WITH A AWESOME UI THAT IS COOLER AND MUCH COLORFUL THAN EVER!

IT IS NOT LIKE JELLYBEAN.......BUT IT IS LIKE "NEMESIS"[UNIQUENESS REDEFINED]

VIBRANT COLORS....UNIQUE THEME.......SIMPLY COOL!

AN AWSOME UI.

SIMPLE-ELEGANT-UNIQUE

NEMESIS2 HAS A UI THAT YOU WILL NEVER FORGET......SOMETHING ALL WILL LOVE!

FIRST EVER UI TO COMBINE MONOCHROME+VIBRANT COLORS IN A UNIQUE COMBO!

AN AWESOME NEW LAUNCHER WITH NEW VIBRANT ICONS!!

SMOOTH-FAST-VIBRANT!

ALL NEW NEMESIS HUB!

ALL THE NECESSARY APPS AND TWEAKS AT ONE PLACE!

PARANOID ANDROID LIKE DIFFERENT TITLE COLOUR!

EVERYTHING YOU WILL EVER NEED FROM UI TWEAKS TO SUPPORT ALL INTEGRATED IN ONE PLACE!

JUST START THE APP AND GET IT ALL!

ALL NEW SYSTEM UI!

ALL NEW LOOKS!

MONOCHROME ICONS WITH VIBRANT TOGGLES!

IT's NOTHING LIKE ANYTHING(YEP,its TITANIUM )

++KERNEL FREE-SO NOW YOU ARE FREE TO USE ANY KERNEL++

++WITHOUT COMPATIBILITY PROBLEMS!!!++

LOW RAM USAGE-GIVES YOUR PHONE SOME MORE SPACE TO BREATH WITH ALL THOSE HEAVY APPS!

INSTALLATION INSTRUCTIONS:

First you need to root your device then continue...

1. Download NEMESIS TWO TITANIUM ZIP from here: Dev-Host - NEMESIS_TWO_TITANIUM_SIGNED.zip - The Ultimate Free File Hosting / File Sharing Service
2. Place the downloaded zip to your sdcard (not inside any folder).
3. Switch off your phone.
4. Now press volume up, home and power button together until the Android recovery shows up.
5. Select Wipe Data. Then select wip cache. Choose "Yes" both times.
5. Select: Update zip from SD Card.
6. Navigate with the volume buttons, and choose Nemesis Titanium Zip with your home button.
7. Choose "Yes" again. Installing wil start.
8. When done, you will be asked to reboot your phone.
9. Go back to the main menu and reboot.
10. Enjoy!!!






Please report bugs if any. The team will be happy to update you with bugfixes in the form of OTA updates.



KNOWN BUGS AND FAQ:



1. Mobile network not working.


Reset your APN.

Go to mobile data -access point -press left button -reset to default

Done.

2. Settings app has weird titlebars
Hehe, sorry about that, that's a graphic error, will fix soon.

3. Some options in Nemesis Hub force close.
Again, that's something we're fixing, expect an update soon.

4. I hate colors.

Well, it's time to try out something fresh and new. Otherwise try out the thousands of other roms that,

unfortunately, look the same.


5. Nice Rom! Smooth and fast!
Well thank you!

6. Can I use xxxx kernel?
This Rom is kernel free, so use any kernel you want. In case of Kernel issues, clarify with the kernel dev.

7. XXXX app is isn't working!
Ask the developer of the app.

8. I hate some things in the Rom, can I change it?
Of course! Nemesis 2 is free for anyone to modify. But if you want to publish your work, please do so in our

forums ONLY.

Disclaimer : Do it your phone at your risk. I will not be responsible for any problem in damage your phone .

Thanks Nemesis Team  

UPDATES AND OTA's

• YOUR FAVORITE OWNER PIC CHANGER NO LONGER REQUIRES QUICPIC!!! HEAD OVER TO LINK BELOW AND DOWNLOAD IT!

http://www.mediafire...83v785ui4knnikm

Walton Primo X1 Software, Flashtools and Drivers

1. Install driver.
2. Open Flash Tool

3. Open Download Agent and select MTK_AllinOne_DA


4. Open scatter_loading and select scatter file
Software-> WBWS305WA_0201_T5056 -> MT6589_Android_scatter_emmc.txt


5. Click Firmware->Upgrade and connect USB cable with mobile Off
6. Then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.


After Firmware Upgrade give Reset to Factory Setting
FILE & TOOLS

DOWNLOAD

Walton Primo N1 Software, Flashtools and Drivers

1. Install driver.
2. Open Flash Tool


3. Open Download Agent and select MTK_AllinOne_DA


4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt


5. Click Firmware->Upgrade and connect USB cable with mobile without battery
6. Insert Battery then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.


After Firmware Upgrade give Reset to Factory Setting
FILE


DOWNLOAD

[Root/Unroot] Symphony W90

Symphony W90

Symphony W90 is a Very good smart phone in this price range. The capability of this phone can be compared to other phones with high price tags. BUT you cant unleash its full power without
rooting it. I personally own this phone and when I bought it, I didn’t found any article on rooting this phone. So I experimented different methods and this method I am about to write worked like a charm.
Disclaimer : Root your phone at your risk. I will not be responsible for any problem in your phone after rooting.
Lets Start ROOT
What you need:
DOWNLOAD ROOT FILE

MEDIAFIREPASS : MENACE

DOWNLOAD DRIVER

1. FirstOf All Enable The Usb Debugging Option On Your Phone (Settings > Development > UsbDebugging).
2. Connect To you PC. Select USB storage and click OK. Then the phone will initialize and connect to PC as a Removable Storage. But we need it to connect as a Media device. So pull the upper notification panel
3. After you connect your phone to your PC, a popup dialogue will appear. Select USB Storage

4. Now pull down the notification panel from above. Select ‘Connected as USB Storage, Touch for other options’ [ See the screenshot ]

5. Now a new menu will come up. Select Media device [ See the screenshot ]

6. Now Download The W90 Root file From above link 7. Extract The zip In your PC 8. Double Click On Runme.batfile (as shown in below screenshot)
9. A Command prompt will appear with black background and green letters. 10. Follow the on screen instructions. Type 1 and press ENTER

11. While doing this your device will reboot several Times. DON’T panic !

12. Now When you see the Green Letter in the Command Prompt Window Saying “Have Fun” , that means your device Is Now Rooted.

But Still If you Want to Check & Be sure by your own Then Download The RootChecker App From Market & Check It yourself. Link To Download Root Checker

Now you’ve got your lovely and powerful W90 rooted !


Now UnRoot


1. Do from steps 1-9 of Rooting W90 [connecting and running the .bat file]

2. Now on the Command prompt write ‘X’ and press ENTER

3. After this your device will reboot several Times. DON’T panic !

4. Now your device is unrooted !

iTools 2013 Build 0511 Released:♥ iTools For Windows

♥ ♥ iTools 2013 Build 0511 Released: ♥ ♥

What’s new?
iTools 2013 Build 0511 Released: Fully support iTunes 11 Optimized the apps manager Minor Bugs fixed.


iTools For Windows PlatformWindows 7/Vista / XP Windows Sever 2003/2008 Device TypeAll series of iPhone, iPad and iPod VersioniTools 2013 Build 0511 Size3.06M(zip)

Download